Kontronik Heli Jive and VBar

Our basic recommendations for the usage of VBar 5.2.4 governor with the Heli Jive (firmware rev. 11) are

Collective add:              25
Cyclic add:                    15
Collective dynamic:        0
Governor gain:              25

The throttle channle throws must be kept at -100 / +100 in Gov 2 tab.
For usage of the bailout both checks (bailout and idle bailout) must be set in Gov 2 tab. The motor must keep on running through the complete AR in this case!

Our recommended values above may be different than the values for your system in case of different configurations. So they are only start values for your own setup.