Upgrade to V5 Pro

Designing the V5 one of our goals was to get a easy conversion for existing setups. If you have a heli with correct settings in V4 or V5 Express there are only a few steps to do for converting into V5 Pro:

Please do as follows:

  • Do the firmware update (use the latest PC software, keep the sensor connected)
  • Click on the reset buttons in the pc software, this can be up from 1 to 3 buttons
  • set the gains as recommended in the bubble tips
  • adjust the cyclic ring (new CR design). You can almost increase about 10...15 points from 4.0 to 5.0 Pro. 85 is default. See Setup, Swash tab, Expert.
  • copy to all banks

Please take a look over all tabs for a final check. Don't forget the usual pre flight checks.