start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Hi Gerd, gut ist das, was Dir liegt, gefällt. Ich persönlich bin ein Fan von linear, experimentiere aber auch immer wieder mal mit Expo und kann mich nicht wirklich festlegen. Das zu den zyklischen Funktionen. Bei der Pitchkurve liegt mir linear auch sehr gut, zumindest bei den Logos und bei Helis mit ähnlicher (guter) Geometrie, für die die Geometriekorrektur der VStabi gut passt. Dvon Eddi E. aus G. - Fragen V5
Hi. I didn't do such a heli myself, yet, but I'd approach it as I always do: Servo arms at a right angle, swash in the center of it's possible travel with the swash driver arms level. With the SX-Head, I'd put level arms before center. Then 0° collective at the blades, and voilà, I have my push rod lengths. As to the balls on the servo arms: the proportion of servo arm length to swasvon Eddi E. aus G. - Logo 200/400/500/600 Questions
Hi. It's not a fault to do so, so it's easier to phrase it that way if you're on limited space What's really needed is VBar to know the center positions of the cyclic and tail stick, e. g. zero rate. I guess your question has to do with throttle? If so, you can also use throttle hold/cut, autorotation to uncouple throttle from the collective signal. You will need to move the collectivevon Eddi E. aus G. - Questions V5
Hi. Das ist kein Problem. Hab ich auch so gelöst, allerdings mit SBus. Das Optimum wäre natürlich, Spannung und Strom direkt bei den Verbrauchern zu haben, also auf der Stromschiene der Stabi, aber da ist man mit der Mini halt eingeschränkt (auch bei 'nem Y-Kabel sind gleich wieder Übergangswiderstände etc. drin). Also ... feststrapsen, fliegen gehen Eddivon Eddi E. aus G. - Fragen V5
Hi Stu, chiming in from Singapore Changi Airport Now, the setup looks not unusual, rather low rates for main rotor and tail but that's personal taste. The tail limits could reveal that the servo arm is not at it's optimal length (usually, you get +/– 100 for a Logo). Adjust vor 2-3° against the torque (powered off, servo arm 90° to the housing) as a starting point. Does your tailvon Eddi E. aus G. - Questions V5
Hi. It's Datei Anhängen. I'm boarding a 12 hr flight now, so please be a little patient Eddivon Eddi E. aus G. - Questions V5
Hi Stuart, I'd also like to see the setup file, I can probably give you some hints, too. Then ... you need to get the bird into the air. When light on the skids, it's neither fish nor fowl. Kind regards Eddivon Eddi E. aus G. - Questions V5
Yeah, well, that's how the UI of the Mac works ... have you converted just recendly ?? Cheers Eddivon Eddi E. aus G. - Questions V5
Hi. First, you can use almost any Mac software to do the Firmware update, no matter what it outputs on the screen. Go to the top menu, File, Online-Update. VBar must of course be connected and powered up. Second, you need the corresponding Mac software to your Firmware to set it up. Else the software warns and this way locks the setup screens. Then, please check what Firmware you have avon Eddi E. aus G. - Questions V5
Hi. Wobei das auch nicht heißt: anknallen. Du musst 'ne passende Mitte finden Eddivon Eddi E. aus G. - Logo 200/400/500/600 Fragen
Hi. Signal-Leitung ist in meinem Buch orange oder weiß ... das was nach plus (rot) und minus (schwarz) übrig bleibt Eddivon Eddi E. aus G. - Fragen V5
Hi Heinz, man kann nichts mit letzter Sicherheit ausschließen. Aber die Stromschienen auf der Vorderseite sind, wenn sie in Ordnung sind, so ziemlich über jeden Zweifel erhaben. Die VStabi zieht etwas über 150 mA im Betrieb, wenn überhaupt, und zieht selbst auch keine Spitzen. Sie lebt, wie alles andere auch, von dem, was reinkommt/anliegt, und zieht nix runter. Die größten Verbrauchevon Eddi E. aus G. - Fragen V5
Hi, genau: bei der Mini mit einem Y-Kabel. Kannst alle Anschlüsse außer RX-A nehmen, und am besten auch das Signal-Kabel auspinnen. Grüßle Eddivon Eddi E. aus G. - Fragen V5
Nu, in die Stabi stecken? In jedem Fall auf der Servo-Seite, auf der Rückseite der Zentraleinheit einer Standard-VStabi nur gem. Anleitung Sensoren, Bedienteil, evtl. Gas-Servo/ESC. Grüßle Eddivon Eddi E. aus G. - Fragen V5
Hi Heinz, ich habe mir das Turnigy-BEC auch geholt, vor dem Erstflug eine Pitch-Pump-Test gemacht, und es gleich wieder ausgebaut und mir ein Jeti SBEC geholt. Schade um die 15 $ ... aber besser als'n 600-er geerdet. BTW, wie ist Dein Fail-Safe programmiert? Evtl. hat der Heli gar nicht 'negativ Pitch' gegeben, sondern einfach die Steuerfunktionen in Mittelstellung gebracht. Grüßlevon Eddi E. aus G. - Fragen V5
Always glad to be of help! Eddivon Eddi E. aus G. - Questions V5
Hi. What Mac OS are you running? With ML we have an issue with the blue tooth stack we were using, it's no longer supported by Apple. There will probably be a solution for this in the future. But we can still use the serial connection over bluetooth. So, have everything turned on and ready then . go to the Apple icon, System Preferences, Bluetooth . select the paired bluetooth devivon Eddi E. aus G. - Questions V5
Hi Alex, first: it's never-ever been reported that the software or the driver got corrupted on a Mac. So there's no need to re-install anything, leave that to the windows guys If it worked, it will work again. The USB cable was disconnected while updating, so you bricked your VBar for the time being. So, here's how you resuscitate it: . Download the recovery firmware from here .von Eddi E. aus G. - Questions V5
Hi. I would always go for the standard VBar on any bird bigger than a 450, but that's my personal opinion. The Mini is nice and tiny, but with all the wires going into the box it's not the optimum under all circumstances ... the separate sensor imo is the better and more versatile design. Imo you're having a ground resonance issue here, the heli starting to shake, then VBar loses it for avon Eddi E. aus G. - Questions V5
Hi. Im Prinzip richtig. Hast Du Senderkalibrierung/Laufrichtungen etc. geprüft, bewegen sich immer nur die Kanäle, die sollen? Wie sieht's im Servo-Monitor im Sender aus? Du schreibst, DX7s zurückrüsten, waren das andere Satelliten? Wenn Du einfach mal davon einen oder beide bindest (richtigen Typ auswählst, natürlich), wie sieht's dann aus? Grüßle Eddivon Eddi E. aus G. - Fragen V5
Hi. OK, 1. möglicher Fehler: Sender-Kalibrierung. Bitte so einstellen (Sender, Servoumkehr, Wege), dass die Balken genauso laufen, wie die Knüppel bewegt werden (links/rechts, rauf/runter, vor/zurück, –100...0...100 %). VStabi kriegt nur Signale, muss davon ausgehen, dass die richtig sind. Danach wieder prüfen: wenn die Fragen richtig beantwortet sind, alles richtig eingesteckt istvon Eddi E. aus G. - Fragen V5
Hi. The overall vibration gauge does only give a ballpark figure on what really happened. The spektrum analyzer would be the way to check it. On what surface were you landing when this happened? With it's rigid carbon/alum frame and head, and the carbon skids there's hardly any part that can absorb vibration or so it seems. Did it start spooling down, did you see something like a groundvon Eddi E. aus G. - Questions V5
Hi. The issue is usually caused by vibration rising over a certain level, the sensors going blind in the 'noise' for a short time. The 'sensor out of range' values happen when the sensor gets a hard hit, aka in a crash or the tip over. It's been reported that this can happen (on different helis) while spooling up, but afaik it's not been reported to happen on spooling down, yet. Where avon Eddi E. aus G. - Questions V5
Hi Alex, nee, kann natürlich nicht jede Meldung erzeugen. Aber wenn z. B. statische Entladungen am Heck/Riemen oder ein Isolationsproblem/Masseschluss am Motor o. ä. zu Problemen führen, wird die RC-Elektronik kurzzeitig gestört/aus dem Tritt gebracht. Und die ersten Meldungen, die da auf der Sensor-Seite geloggt werden, sind eben Prüfsummen-Fehler (d. h. der Datenstrom vorm Sensor zur ZEvon Eddi E. aus G. - Fragen V5
Hi. Check mal Deine Drucklager. 1.800 ist jetzt nicht üppig für einen 500-er, aber er lässt sich prima und präzise schweben/fliegen. Grüßle Eddivon Eddi E. aus G. - Logo 200/400/500/600 Fragen
Hast Du das hinter 'nem Hub oder direkt am PC/Notebook? Grüßle Eddivon Eddi E. aus G. - Fragen V5
Habt Ihr'n Rad? How old school Eddivon Eddi E. aus G. - Logo 200/400/500/600 Fragen
Yessir! Kind regards Eddivon Eddi E. aus G. - Questions V5
Hi Louis, the recovery works for all USB devices, just do it Kind regards Eddivon Eddi E. aus G. - Questions V5
Hi. Bedenke, dass Du den sensor auch hängend lagern kannst. Ich würd's so probieren, Sensor-Kabel nach wenigen cm spannungsfrei nochmal abfangen und gut. Grüßle Eddivon Eddi E. aus G. - Fragen V5