start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Slave carries the rpm signal so has to be split so that the signal wire goes to the rpm port at the back of the standard full size VBar. The red and black you can plug into any spare servo port. Wiring here https://www.vstabi.info/en/node/641 Also make sure the telemetry wire is connected to either the RX 1 or RX2 port.von Vinger - Café
Has the Tribunus been set to VBar communications via the Sproto software?von Vinger - Café
A user has a problem with the sensor config with a Blue Line unit on the VBCt. It depicts a Neo in the sensor orientation selection instead of the Blue Line sensor. He states that he can only get the unit to work correctly with the orientation set differently to the Neo pictured. I do not have a Blue Line unit to check, can you help him?von Vinger - Questions VBar Control Touch
Have to first stick program the ESC, mode 1 and then mode 4 as a minimum. The Kontronik ESC cannot use VBar governor and you have to use external governor in the VBC/t settings. https://www.vstabi.info/en/node/1831 https://www.kontronik.com/fileadmin/kontronik-sobek/Public/Content/Images/Content/Downloads/Anleitungen/JIVE.pdfvon Vinger - Café
https://www.vstabi.info/en/ccvon Vinger - Café
Need to update the Tribunus firmware to the latest one. https://www.scorpionsystem.com/support/downloads/ You will need the VLink2 cable and the included diode cable to connect to Sproto software on your PC.von Vinger - Setups
How is AUTOTRIM switch set in the VBCt? It might be active all the time, will hear the chimes, and causing the servos to try to find a trim setting.von Vinger - VPlane/VBasic VLink
GeneG Wrote: ------------------------------------------------------- > Hi, Vinger > > "Have you loaded the VBasic App?" > > Under "My Devices", clicked on the "Apps" icon for > this NEO basic and it shows that > the "Basic VLink Receiver 1.1" is loaded. > > Also, when I connect this NEO to my PC, with the > "von Vinger - VPlane/VBasic VLink
GeneG Wrote: ------------------------------------------------------- > Why is it now when I try to enter "Edit Model > Setup" and the "Start editing current Setup", > it enters Basic Model Setup with model Name > "Flieger"????????? > > I cannot change the NEO orientation. > > what is wrong with this?????? > > This is so fruvon Vinger - VPlane/VBasic VLink
We are all waiting for Vplane 6.4 to get the vector thrust settings.von Vinger - VPlane/VBasic VLink
GeneG Wrote: ------------------------------------------------------- > Hi, Vinger > > Will that violate any rules concerning gyros? > > One can't use any form of gyro in AMA > competition. > > Cheers The Vbasic does not use gyros for normal flight. So it will be good for competition. Here are more info re trim and note the recommended way is to use the trimvon Vinger - VPlane/VBasic VLink
GeneG Wrote: ------------------------------------------------------- > Hi, Vinger > > Thanks for your response. > > "temp changes, density changes do not affect it." > > I don't understand. > > I have flown fixed wing competition at "sea > level".....as well as at over 3500'. > > When I flew at 3500' after flying at sea levvon Vinger - VPlane/VBasic VLink
What I have found is that with WiFi directly to the VBCt there can be problems, but using the exact same WiFi on my laptop and then connect the VBCt to USB via the manager it updates and downloads lightning fast. So somewhere in the VBCt the data over WiFi gets slowed down or corrupted. Just my observation.von Vinger - Questions VBar Control Touch
Autotrim works perfectly and the beauty is once done you never have to do it again, temp changes, density changes do not affect it. Caution do NOT use autotrim on the ground.von Vinger - VPlane/VBasic VLink
Hi Gov already active after MOTOR to IDLE? Do you have the MOTOR switch on a spring loaded switch? Petervon Vinger - Café
It will be greyed out if no update is available.von Vinger - Questions VBar Control Touch
Hi Kyle made videos about the MNeo update process. You will need the USB cable to do it. https://uroehr.de/vtube/cat/vbar-neo Cable http://shop.mikado-heli.de/VBar-Electronics/VBar-NEO-VBasic-Receiver/VBar-NEO-Accessories/Mini-USB-cable-for-VBar-NEO-mini.htm?shop=k_mikado_e&SessionId=&a=article&ProdNr=05395&t=7568&c=8037&p=8037 Language settings is under Controlvon Vinger - VBar VLink
Hi Do the update via your PC, USB and VBC Manager once it it will then be able to do OTA updates via VBCt. Remember the bootplug for the Neo. Petervon Vinger - Questions VBar Control Touch
Did you insert the bootplug?von Vinger - VBar VLink
VBC or VBCt? It is only adjustable in Pro firmware. Petervon Vinger - Questions VBar Control Touch
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi Peter, > > thank you for the feedback. Can you narrow it down > to particular models, or was it the same for all? > Did you have tail gain set to the possible maximum > (maybe –5 points or so), or just to a sensible > value where it held properly, but not maxed out? > > Tryivon Vinger - Café
Hi Have found that after update to 6.4 that the tail buzzes at certain times and maneuvers, all I did was to raise the antiwag to 5 and all the same as before. Petervon Vinger - Café
Just update my first Vplane Neo and do not see the 3D settings. Using VBC with it. Is this a VBCt only function?von Vinger - VPlane/VBasic VLink
Hi Eddi Thanks for the answer, can we just have a short explanation what the new 3D setting does in the latest Vplane firmware? Thanks Petervon Vinger - VPlane/VBasic VLink
Hi Just finished watching the love broadcast from yesterday, but saw nothing explained about the new features of Vplane. Maybe missed it so can you explain the new features or point to the timeline in the live broadcast where it is explained? Thanks Petervon Vinger - VPlane/VBasic VLink
Have you installed the driver? Videos here https://uroehr.de/vtube/cat/vbar-neovon Vinger - VBar NEO (non VLink)
How will the update and registration process work on the Mini Neo for those not having a VBCt?von Vinger - VTV
Hi Eddie Thanks for a vert informative answer. It is basically Celsius in use worldwide but in the US the airport data is normally given as Fahrenheit and converted for use by the crew. Altitude is 99% in feet all over the world with a few exceptions were the decimal system is in used for altitude. Aviation uses knots for speed nearly exclusively with again a few exceptions in the world. Fovon Vinger - Café
Tomas Wrote: ------------------------------------------------------- > Hi! Which setup wizard should I use to setup a > Kolibri esc? VBC or VBCt? On the VBC the wizards are still there and you can use any of the Kontronik ESC to do setup. On VBCt there are no more wizards and you just use direct motor control with external governor selected to do the stick programming.von Vinger - Café