start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
RV Wrote: ------------------------------------------------------- > To delete a battery from Top5: > > - update VBCt > - connect the regarding Model, Top5 opens > - long press on the battery to be deleted The delete function does not work after the update as the battery that was deleted shows up again after a restart of the Neo. We have tried this on two different VBCt raby Vinger - Questions VBar Control Touch
Hi RV Have had a few instances where we found that a created battery would show a flight logged in 1970 and the capacity would change to some ridiculous number, for example a 2600mAh would change to -41700mAh. Users does not realize this and would fly relying on the mAh consumption but there are no countdown of consumption and eventually discharges the pack beyond safe levels. This happensby Vinger - Questions VBar Control Touch
RV Wrote: ------------------------------------------------------- > I won't use the Motor switch. > > In case you need to do a emergency autorotation > (full off) it shuts down too. And - if you need to > do this in case of a ESC/BEC failure ... (not a > good idea). I also thought that the SAFETY switch would be a good idea to use as an OFF switch for it.by Vinger - Questions VBar Control Touch
No Worry Rainer, I figured it out. Time to experiment and play.by Vinger - VPlane/VBasic VLink
Hi RV I know it comes without support, but exactly what is changed and what is the app called. I see nothing new on my VBCt. Is this a new setup selection or just macrocells for enabling VE control. Thanks Peterby Vinger - VPlane/VBasic VLink
RV Wrote: ------------------------------------------------------- > Done on both. Thanks will update laterby Vinger - VPlane/VBasic VLink
Hi Rainer You can use my VBCt serial number then I can test it at my own risk. Cheersby Vinger - VPlane/VBasic VLink
I see there are new input selections for macrocells called VE Tail and VE Elev. Where are these inputs from and when would they be used? I assume it has to do with thrust vectoring but have no idea on how it works or where the input is derived from. Cheersby Vinger - VPlane/VBasic VLink
Hi Rainer Thanks got it all programmed as it should. Next project will be for a vectored thrust jet. Peterby Vinger - VPlane/VBasic VLink
Hi RV I have been asked to help out on a F16 1/5 scale Skymaster kit. Two Neo's with interbus. Following functions required Two Flaperons ( functions as both ailerons and flap, flaps to be mixed to elevator as well, not just trim but function) Two all flying Ailevators (Functions both as ailerons and elevators) Questions 1. To start with do I select two aileron and two elevator modelby Vinger - VPlane/VBasic VLink
Thanks RV another idea to try, and yes have a bench setup to try all these programming on.by Vinger - VPlane/VBasic VLink
Hi I have send you an email Cheersby Vinger - Café
Amazing mechanics. RV why do you use a UI unit with the Scorpion Tribunus which have full telemetry already?by Vinger - Videos/Pics
Hi RV Attached are setup and macrocells from an Avanti Jet I helped a friend to do the setup. Performs perfectly, only problem is the GEAR and DOOR setup. It needs at least 9-10sec of delay as these are electric retracts and move slowly in and out. The retract side is all OK with wheel in and door closing as it is currently set. Full delay of 9 seconds. As the delay is not required on loweby Vinger - VPlane/VBasic VLink
It is a Scorpion Tribunus ESC and system is powered by BEC. Battery selection is set to manual.by Vinger - Questions VBar Control Touch
Hi RV It is a 6S pack deleted and recreated many times, it shows as 25V in telemetry but warning only happens with this specific Neo as he has tried another and it does not give the warning.by Vinger - Questions VBar Control Touch
Have a problem with a VBCt and a specific Neo that warns that the battery is not fully charged when it gets selected. Not on my radio but a customer. Both are fully updated and he uses manual selection of the battery. Have deleted and recreated the battery, 6S, volts at 25V but the system warns him every time he selects this battery. Two other Neo's he uses works perfectly when selecting tby Vinger - Questions VBar Control Touch
Thanks for sharing Rainer, this looks like a fun project to do. Peterby Vinger - Videos/Pics
Hi Rainer Is this from a kit or where did you get the scale fuselage? Really nice little toy. Peterby Vinger - Videos/Pics
Thks RV the customer saw your answer and he is a happy camper.by Vinger - Questions VBar Control Touch
Hi With a large number of batteries in the list, then deleting them in the cloud it does not delete it from the VBCt list. Even after having the VBCt connected to the net for a while. Eventually deleted vis USB and all is well. My question would be, why cannot one delete batteries directly on the VBCt? If yes how and where as I could not find the function anywhere. Regards Peterby Vinger - Questions VBar Control Touch
Thanks Rainer it seems that he got it figured out.by Vinger - VPlane/VBasic VLink
Thanks for the reply. In your pic of macrocell 11E1CH1 is what we use, but if you select input signal as Channel 1 then the wing mixers work but not the gyros. If we select input as FC Elevator then the gyro works but the wing mixer settings not. This is from the guy I am helping as I do not have a test rig with SBus unit to verify. Cheers Peterby Vinger - VPlane/VBasic VLink
Hi Rainer Thanks for the info. I am still a little confused about what to use when on each flight control output. What we have is that if everything is left at default with only SBus selected as output from the Neo, then there are no gyro stabilization and the wingmixers have no effect on the channels. So if one choose say FC-ELEVATOR as input at the macrocell channel for say the elevatorby Vinger - VPlane/VBasic VLink
Hi RV Vplane with Sbus output from Neo into a power distribution box. Am I correct in assuming that at the flight controls channel's macrocells one has to select FC-xxxx as input for the gyro function to work? Setting maximum throw is that still done in the wingmixer setup? Will all the AGILITY and GYRO settings in flight settings still be active for BANK switching as per normal VPlaby Vinger - VPlane/VBasic VLink
Just update the VBCt to the latest version. If still have it then follow the directions at the bottom of the page https://www.vstabi.info/en/christmas_2021by Vinger - Questions VBar Control Touch
RV Wrote: ------------------------------------------------------- > Changed all - could ypou please re-check? All working thanks Rainerby Vinger - Questions VBar Control Touch
Hi Rainer Still no joy, Chrome, Opera or Safari, the link for "Download Now" does nothing. Even tried from other computers and connections. Even have a few other Mikado users experience the same.by Vinger - Questions VBar Control Touch