start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
I have the V5Pro Silver V-Bar for a few months now without any issues. Two weeks ago when I was flying it looked like that I had a "glitch". So I landed and read the log and I show the error "Low Voltage of 3.3V Rail" and immediatly after "RC Input of Pitch, Aileron, Elevetor, Tail and AUX Channel missed". I use Fromeco 5200mAh Lion batteries and this particular pby HeliNick - Questions V5
Hello, Is there a way to setup the Failsafe for the VBar 5.3.4 Pro using Spektrum satelites to idle instead to fully closed throttle? I tried to setup the "Set throttle failsafe" when the throttle stick is at the idle position but when I turn off the Tx the throttle goes to the fully closed position and not to the idle position I had setup from the previous step in the "receiby HeliNick - Questions V5
Hi, I couple of weeks ago installed my new VBar on a X-Cell Whiplash Gasser and it works great like the last one I have on a TRex 600N. A few questions about version 5.3.4 Pro: * Can reset the Logs? * Besides online is there a VBar 5.3 Pro full manual to download for reference when at the field and there is no internet connection? I have used GV1, Aerospare Gov. but this is the 1st tby HeliNick - Questions V5
So for the X-Cell gasser should I use the Standard Full-size Silverline or the 800 XXtreme PRO version? Also, does the EXtreme Pro comes with the PRO software or I will have to buy it separately like the standard version? Thanks, Nickby HeliNick - Questions V5
I am in the process building a X-Cell Whiplash Gasser 90 FBL (Flybarless) and I am looking for the best version of V-Bar to use. i believe that "Fullsize Silverline V-Bar V 5.2" is the best option but also i would like to know what is the difference to "Fullsize Silverline V-Bar V 5.2 XXTreme Edition PRO". Does the XXTreme includes the PRO software too? By the way, I amby HeliNick - Questions V5
I just ordered my MA Whiplash Gasser FBL (Flybarless) and reading around for V-Bar on Gassers. I love my VBar on my Nitro TRex 600 FBL and I have friends with VBars on many electric 700+ size Helis. I almost upgraded my Synergy N9 to FBL but with the Nitro prices I desided to built a Gasser Heli instead! i have good experiances with Gas engines on planes (DLE 55 and 111) but never used in oby HeliNick - Questions V5
I did some searching and I could not find the answer. I apologize in advance if it is already answered. To upgrade from 4.0 (black plastic sensor) to V5.0 Pro do I just bye the V5.0 Pro upgrade? Thanks, Nickby HeliNick - Questions V5
Hi Brad, I am flying an Align 600 Nitro Pro with the Align head and the Align metal blade grips. I am using Infinavation Dampeners (for Align head) and they work great with the VStabi 4.0. I have them on for about 6 months and the O-rings are still good. By the way, on the Nitro they don't like to spin below 1750 RPMs; firm dampeners. You can get them at Ron's. I hope this helps. Neeeby HeliNick - Questions V4
I thought of this but just wanted to make sure. Thanks Rainerby HeliNick - Questions V4
Is there a way to "Clear" the Autotrim from the Control Panel? Also, I noticed that its bank has its own Autotrim status now. Does this mean we will have to run the Autotrim procedure for each bank? Thanks, Nickby HeliNick - Questions V4
What is the "Reciver" Option before the "Live" Menu? Nickby HeliNick - Questions V4
Hello, What are the differences between 4.0.17 & 4.0.18? Any precautions when upgrading VStabi from version 17 to 18? Also, the same questions for Control Panel version 17 to 17b. Thanks, Nickby HeliNick - Questions V4
Hi Uli, Thank you for the information. I have fun jump starting my Synergy N9 ( (with the OEM flybar until now...) but with the extra response and power I am getting now with the VStabi equiped T-Rex 600N I wanted to try it on it too. Thanks, Nickby HeliNick - Questions V4
Hi, Sometimes I like to take-off having the rotor in high rpms (idle-2) and zero pitch (or slightly negative) on the ground and then give it full pitch (~ +13) for a very small time period so it "jumps" from the ground. As I understand VStabi will stabilize the moment is airborne; is the above take-off "acceptable" for Vstabi or better avoided? Thanks, Nickby HeliNick - Questions V4
I could not use all the banks (0,1,2 and 3) with the gyro gain so I created a mix (JR 12X) from FMOD to Aux2 which is connected to the VStabi Aux. I turned on the "extra" FMods of the Tx and assigned the mixing with -100%, -25%, -25%, 25% and 100% for FMods "normal/hover", 1, 2, 3, and 4. Now I can have all 4 Banks selectable with the "working" bank 0 as referenceby HeliNick - Questions V4
Thank you for the information. I friend of mine showed me his Control Panel and looks very functional for updating/changing VStabi parameters away from a computer, like on the field. I think I will invest to a Control Panel. It is not as "high-tech" as BT but it does the job.by HeliNick - Questions V4
Would you please check my parameters because I had to change quite a few servo reversing etc. I use a standard 600N Pro with the Mikado head conversion for the Align aluminum grips as per instructions (leading). My configuration is as follows: Tx JR 12X DSM Rev servos: Throttle, Aileron, Rudder Rx Spektrum 9000 Scott Gray Reactor-X regulator Fromeco LiIon 2600 mamp battery Multigovby HeliNick - Setups
Hello, Before I purchase the BT modules I would like to find out if "VBar PDA 3.6.16" (install36_en.cab) I have install on my Mobile Windows 6.1 and VStabi 4.0.17 are compatible. The V4 Handy.jar will not run on my Mobile Win6.1 using MIDlet Manager. It seems like there are a lot more options in version 3.6.16 than on my PC's version 4.0.17; even under the Expert Parameters. Alby HeliNick - Questions V4
What a great idea! Thank you Rainerby HeliNick - Questions V4
Thank you for verifying my ... logic. HeliNickby HeliNick - Questions V4
For Optimum V4 operation is it recommended to use Bank switching instead of Tx created Flying Modes/Idle-Up? For example on my other helis with flybars I have "Normal" with -5/+10 pitch, Expo 30% and head speed 1750 rpms. Then Idle-1 and Idle-2 with +/-13 deg. pitch, some other Expo value and head speeds u1900 and 2100 rpms respectively using a speed governor. Also, I have the usualby HeliNick - Questions V4
I am using ReactorXs on all my helis (50 and 90 nitros) for a while now. At this time I am converting my T-Rex 600N Pro to a VStabi 4.0 system and I am using the previously installed ReactorX and Spektrum AR9000 receiver. I am still on the setup process but everything looks and operate as expected with the ReactorX between the 3 cyclic servos and channels 1,2 and 3 of the VStabi controller. Soby HeliNick - Questions V4