Increase the quality of transmission and reception with a NEO

Hi,

I have a question, I have two turbine helicopters that measure more than two meters. I would like to strengthen the reception and transmission. Can I add a satellite to my NEO to improve the reception and transmission?

Thank you for your answer.

Best regards

Carryl

You can add a second NEO as slave ...

https://www.vstabi.info/en/node/1911

So am i doing in all my scale ships ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

There is also a difference when having a Interbus with 2 NEO or 2 EVO (they can't be mixed here):

- NEO MUST be connected all 4 orange leads AUX 2+3 on Master and Slave - so both are not available
- NEO sends telemetry always through master only back to VBC
- NEO telemetry can only be connetced on the master

- EVO must be connected only at AUX3 together
- EVO sends telemetry with the best path of all 8 possible paths
- EVO telemetry can be conneted to master and slave

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



1 mal bearbeitet. Zuletzt am 07.08.2024 17:42 von RV.

Hi Rainer,

Thank you very much for your answer, last question. I have powerboxes as power supply, will the master NEO automatically power the second NEO?

Carryl

Hi,

it does, when ground and live are also are connected.

In fact, the pin header board on a VBar is like a power rail, all +/– pins are connected, and with sufficient copper to sustain 3-digit amperages peak (which a single 'bell wire' or servo connector wouldn't sustain, or not for long ..).
So make sure the wires are sufficiently dimensioned, so they aren't bottlenecks, and use a sufficient connector if you power the whole thing through the Interbus-Harness, like in the photo in the link in the 2nd post.

Kind regards

Eddi

Born to fly ...
forced to work.

Hi Eddy,

Thanks for your reply. I'll try all that.

Best regards

Carryl