New Evo Tuoch, ESC option for output selection?

Hello heli friends, I have question in regards to the new options on the new Evo touch in regards to the new options of the ESC specifically.

When going into setup you now have a selection for output type:

72hz/1500/1520us
144hz/1500/1520us
333hz/1500/1520us
500hz/1500/1520us

Wanting to understand this.

For Scorpion Tribunus+ 14/200A ESC what is optimal choice?
For YGE 205 HVT what is optimal choice?

Before this selection option existed what was the default from above list when we only chose external and did not have all these choices?

Want to pick best choice as was happy with esc performance even with internal governor pre Evo choices.



1 mal bearbeitet. Zuletzt am 10.02.2023 23:01 von OICU812.

https://www.vstabi.info/forum/read.php?42,196832

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

RV Wrote:
-------------------------------------------------------
> https://www.vstabi.info/forum/read.php?42,196832


Thank you, to clarify (BEFORE) these options were available, the standard when one chooses on normal Vtouch/NEO was then 72hz/1500/1520us to the ESC is that correct?

Yes it is.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Perfect thank you Rainer

Rainer, also to ask you...


These values on the link you provided seem to be tested, but want to ask is that also if you are using those escs with their internal governor? Way I read this, tests done with Vbar governor with those escs?


- YGE 205 HVT, 333 Hz, Spoolup Limit 2
- YGE 95 LVT, use 72 Hz only
- HW 150 LV V5, 333 Hz
- Scorpion Tribunus 14-300A, 333 Hz

So from Above for example, I run Scorpion Tribunus 200A escs, then if I run (internal governor NOT Vbar gov) and set setting for 333hz and this will be ok?

Shawn,

this topic already mentined in linked posts above ;-)

Using ESC's gov makes no sense to run a higher framerate as the signal from VBar to ESC is not changing during a flight!

Quote:

It will only make sense to use a higher one in VGov mode -as all others are "Flatline" values.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



1 mal bearbeitet. Zuletzt am 11.02.2023 09:19 von RV.

Alright thanks, just like to be (100% certain) is all.