We always recoomend ESC's with a setup through VBC telemetry - like Scorpion and YGE together with a VBC or VBCt for best practice ;-)
Al other ESC's can be programmed as usual - there is no difference at all when you have the NEO in the ESC setup mode. It is still the same as for V5 and 3rd party radios - the collective signal is directly routed to the ESC port if the regarding check is set in the PC. This mode survives also a power cycle (e.g. plug on with full stick for entering programming mode) - and must be deactivated seperately afterwards.
In PC - use the ESC Setup Tab where Throttle (set to 100/100) can be adjusted, in a VBC use the ESC setup panel, in a VBCt use the ESC throttle setup in Model Setup. Ensure that collective gives -100/100 in teh TX calibration screen of course ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.