Vbar Control beeps constantly

Hi,

I just turn one of my VBar Neo to VPlane and make a new setup for a sailplane.
All seems working fine, but, after succesfull connection betwen VBC and VPlane Neo, my VBC start slowly, but constantly beeping. Neo logo light green, and VBC dont show any warning message.
ESC CC Phoenix is connected now to VPlane Neo, but, when I start "new plane wizard", ESC was unpluged, and NEO was powered by separate 2S battery.
When I unplug VPlane Neo and connect my another Neo with Logo 550, VBC is "quiet" and I can fly as normaly.
After that, when I reconent VPlane Neo once more, VBC start beeping, but all seems working fine.
I am afraid to take sailplane for flight.


Any idea, what s wrong ?

Many thanks,

Miro

Hi Miro,

you have probably assigned a switch for Auto Trim. As long as it is enabled, VBar Control will beep.
Afaik this is a setting per model, so it can be enabled on one but must not necessarily be on the other.

Kind regards

Eddi

Born to fly ...
forced to work.

Thank You Edi,

I ll check it.

Many Thanks,

Miro

Yes !
As you think, Autotrim switch was "ON".
Excellent job.

Miro



Edited 1 time(s). Last edit at 04/20/2018 07:31AM by mirofric.