Hi,
with VBar Control, the motor switch is _always_ a 3-way-switch: OFF-AUTO (bailout/th)-ON.
By default, there are three banks (on a different 3-way-switch), if you switch to AUTO or OFF the current bank will still be active.
With the
Pro Parameters App you can choose a fourth bank only to be used in AUTO/OFF mode.
What is the reason you use the TH and bailout the way you do it (apart from being used to it)? We are always open for input
we just did not see a reason to make things more difficult than needed until now ... everything's possible, but in the beginning we want to keep it as simple as possible.
Kind regards
Eddi
Born to fly ...
forced to work.