Re: how to disassemble swashplate
January 28, 2016 01:06AM
Registered: 11 years ago
Posts: 91
Hi Eddi,
For my part I had two Swashplates which both had some issue after a crash. Therefore, I wanted to use parts from each plate to create a new one. Doesn't seem that easy to do that :-).
Re: how to disassemble swashplate
January 28, 2016 01:06AM
Registered: 11 years ago
Posts: 91
Hi Eddi,
For my part I had two Swashplates which both had some issue after a crash. Therefore, I wanted to use parts from each plate to create a new one. Doesn't seem that easy to do that :-).
Re: how to disassemble swashplate
January 28, 2016 08:18AM
Moderator
Registered: 17 years ago
Posts: 17,819
Hi,
in fact it isn't easy at least at most home workshops, because the parts are pressed into each other. You need a proper press and matching tools as not to damage the bearing and the aluminum parts. Removing the plastic ball joint will most probably damage the groove which holds it in place, you would have to glue it in once it's been removed.