Show all posts by user
About VBar Control / Über VBar Control
Re: 760 pulse option on cyclic servos? New NEO? - 2 years ago
Eddi E. aus G. Wrote: ------------------------------------------------------- > I can't and won't go into technical details, and > it's about the feel after all, what the > combination of hardware and software can make out > of an overall setup, it's not about numbers. > Is expert setting will available for adjustments out of the box? Or like for current Neo - will reby Jock_rst - Café
Re: 760 pulse option on cyclic servos? New NEO? - 2 years ago
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi, > > details will follow once we have solid > information. > Right now, we're still exploring new limits, with > different setups, on different helis. > And even now, test pilots Marik and Alex would > have grinned 360° had they no ears > Me as a bystander was like, holy cow!by Jock_rst - Café
Re: 760 pulse option on cyclic servos? New NEO? - 2 years ago
OICU812 Wrote: ------------------------------------------------------- > I recently seen Ralph in an interview speaking as > to a new Vbar NEO due to some electronics shortage > but also some comments of the new new being a big > upgrade from a hardware perspective. > Can you provide link to the Ralph interview?by Jock_rst - Café
Re: Replace Lipo with Lion? - 2 years ago
Finally tested on the field in real conditions: 42 flights from 100% to 11% battery. So, not too much flights as expected. Relatively close to the stock 6000 1S lipo battery.by Jock_rst - Questions VBar Control Touch
Re: Vibration analys question - 2 years ago
RV schrieb: ------------------------------------------------------- > Does the 2nd NEO have a RPM info for us? > > Which ESC/Gear Ratio is set? Understand ) No on second Neo have not rpm signal from ESC. Gear is 9.415by Jock_rst - VBar VLink
Vibration analys question - 2 years ago
Hi, So, we have two Kraken 580 and two Neo V link installed on the helis. On first Neo i have info about vibration group - Tail rotor, main rotor and motor are displayed on the VBCt On second Neo is not displayed any groups like Tail at analysis display. Only some Hz of unrecognized vibration is displayed. What reason that vibro groups is not displayed on second Neo?by Jock_rst - VBar VLink
Re: logo 200 tail blows out - 2 years ago
Just impressed with Macrocells. Really really powerful feature!by Jock_rst - Logo 200/400/500/600 Questions
Re: logo 200 tail blows out - 2 years ago
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi, > Another approach could then be, use throttle > curves instead of the Governor, plus mixing, to > take the Governor out of the equation. > > —Eddi Thanks Eddie for detailed explanation best as always. I know about Macrocells system and think it's really powerfull feature. Now i haby Jock_rst - Logo 200/400/500/600 Questions
Re: V Bar Touch improvements - 2 years ago
One more for VBCt: If Battery Fixed Id is set, don't display battery list. Just display Fixed Id banner and that's all. Is not need to display batteries list for improving UX experience.by Jock_rst - Questions VBar Control Touch
Re: logo 200 tail blows out - 2 years ago
Again lost tail autority today on fast backward after repairing my Logo 200 =( What the reason why Mikado won't add TALY feature?by Jock_rst - Logo 200/400/500/600 Questions
Re: Logo 200 / M2 thrust bearings issue - 2 years ago
ventle Wrote: ------------------------------------------------------- > Just checked the manuals for the various OMP M2 > versions. While the regular M2 and M2 V2 is using > the same washer as the Logo 200, the M2 Explore > actually has a large diameter washer (Ø4xØ6x0.1 > mm) in this location: I replaced with bigger dia. The test pilot OMP committed that is bug and inby Jock_rst - Logo 200/400/500/600 Questions
Re: TALY control in logo 200? - 2 years ago
johnahamelv Wrote: ------------------------------------------------------- > I too vote for adding TALY to the Logo 200. If > the guys at OMP figured out how to add TALY, I am > sure the guys at Mikado can catch up or even > exceed the OMP TALY feature, if they make it a > priority. TALY implemented in the open source Rotor Flight FBL so long time. I don't clue why Mikaby Jock_rst - Logo 200/400/500/600 Questions
VBar NEO VBasic Receiver update to Neo Pro - 2 years ago
Is it possible to update 05054 VBar NEO VBasic Receiver to Neo Pro firmware? https://shop.mikado-heli.de/VBar-Electronics/VBar-NEO-VBasic-Receiver/VBar-NEO-VBasic-Receiver.htm?shop=k_mikado_e&SessionId=&a=article&ProdNr=05054&t=7568&c=8035&p=8035by Jock_rst - VPlane/VBasic VLink
Re: V Bar Touch improvements - 2 years ago
Idea for Neo update. (Taken from RotorFlight project): Advanced gyro filtering for helicopters: - Dynamic RPM based notch filter banks - Advanced dynamic LPFby Jock_rst - Questions VBar Control Touch
Logo 200 / M2 thrust bearings issue - 2 years ago
The issue in the Logo 200 (M2) rotor head. Detailed explanation on the image.by Jock_rst - Logo 200/400/500/600 Questions
Re: V Bar Touch improvements - 2 years ago
Helidirect make a new grip design: https://www.helidirect.com/products/v-control-radio-handle-with-standby Jock_rst - Questions VBar Control Touch
Re: logo 200 tail blows out - 2 years ago
TALY is an open source feature. Just strange why Mikado still not implemented in the Logo 200 Neo mini firmware. https://github.com/rotorflight file governor.c // Tail Torque Assist if (mixerMotorizedTail() && govTTAGain != 0) { float TTA = govTTAGain * biquadFilterApply(&govTTAFilter, mixerGetInput(MIXER_IN_STABILIZED_YAW)); govTTAMull = constrainfby Jock_rst - Logo 200/400/500/600 Questions
Re: Replace Lipo with Lion? - 2 years ago
6 days radio on hold (14.06 - 20.06) - no sim, no flights. Self discharge about 3%.by Jock_rst - Questions VBar Control Touch
Re: V Bar Touch improvements - 2 years ago
Option - disable gyro while is USB mode (simulator). Currently charging works only if radio in vertical orientation. If radio in horizontal orientation charging is not works. At some cases gyro initialized not a correctly and charging not works in vertical orientation.by Jock_rst - Questions VBar Control Touch
Re: logo 200 tail blows out - 2 years ago
TomRSV Wrote: ------------------------------------------------------- > Hi Eddy, > > I have the same problem sometimes where the tail > cant hold and kicks 180 degrees. I am not doing a > fast pump or crazy 3D. Switched the tail motor for > a new motor and the same happens. It does happen > in somewhat more windy situations with the tail in > the wind. My friendby Jock_rst - Logo 200/400/500/600 Questions
SCO Capacity warning - 2 years ago
On the HF someone asked about "SCO Capacity" warning. What that mean?by Jock_rst - VBar VLink
Re: Replace Lipo with Lion? - 2 years ago
The main problem - to use full capacity of Lion need cutoff on 2.6 v, but in the VBC / VBCt cutoff on the 3.2 volt. Would be great to add cutoff voltage option in the radio settings. Or just two selectable options: Lipo (3,2) and Lion (2,6) It can be included in to Pro App bundle. Who need it - know for what.by Jock_rst - Questions VBar Control Touch
Re: Replace Lipo with Lion? - 2 years ago
14000 mAh Lion test results: Start charge: 90% Final charge: 5% Simulator via USB: 10 hours Flights: 3 hours Test conditions: Simulator with lighing sensor (semi dark environment) 1 flying hour with max screen brightness - light sensor was oriented to sunlight 2 flying hours with light sensor Active options: wifi (1 hour), active idle, voice Total work time: 13 hours Days: 7by Jock_rst - Questions VBar Control Touch
Re: V Bar Touch improvements - 2 years ago
One more: Add button as Antenna level icon. By tapping to icon we can examine current signal level, instead Menu->Model Status->Scroll down to Antenna Status.by Jock_rst - Questions VBar Control Touch
Re: Replace Lipo with Lion? - 2 years ago
Eddi E. aus G. Wrote: ------------------------------------------------------- the > on-board charger is designed for slow charging, > for safety reasons, and to ensure the longevity of > the battery. Thanks Eddie for the info. p.s. i need custom firmware for speed up chargingby Jock_rst - Questions VBar Control Touch
Re: Replace Lipo with Lion? - 2 years ago
Question: Is it possible to use 12v 4A power supply to charge my Lion pack via VBCt? Is VBCt motherboard allow 4A current?by Jock_rst - Questions VBar Control Touch
Re: What day for new products announcement? - 2 years ago
Flight trainer really nice tech for beginners! Will solve problem with many crashes and disappointment on entry to hobby. Also hope that Mikado will releasing something for intermediate / advanced pilots, something like Neo2by Jock_rst - Café
Re: Logo 200 default collective and cyclc angles - 2 years ago
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi, > Again ... what you get with a new setup is the > real deal, it's what we use when setting up and > breaking in each and every new model. > Thanks Eddie. I've dissasembly my Logo 200 to replace broken parts, also rod links and plastic links are replaced. Links lenght exactly how it spby Jock_rst - Logo 200/400/500/600 Questions
Re: Replace Lipo with Lion? - 2 years ago
ikarus991 Wrote: ------------------------------------------------------- > I saw and read that! > my question was how you charge the cells. > via the charging socket in the vbct or externally First charge was externally (for testing capacity). Next charge will be via charging socket of the Vbctby Jock_rst - Questions VBar Control Touch
Re: Replace Lipo with Lion? - 2 years ago
ikarus991 Wrote: ------------------------------------------------------- > hello, > how did you charge the cell's? > about the vbct conector or outsite the vbct? I've purchased connectors and connect to the VBCt motherboard as stock lipo battery. Still testing battery life time from one charge. Currently 7.5 hours. 6.5 h in the siumulator with light sensor 1 hour on maximum lby Jock_rst - Questions VBar Control Touch