start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
I got her all put back together.. And, I think it's important to put this here, the issue was 100% my fault. The Logo 550SX was my first real heli build and lets just say that I should pay closer attention to the instructions and include every washer & spacer exactly where the instructions tell you.. The good news is.. she flew better than ever this morning.. So all is well that ends wellby Brianmurray77 - Logo 200/400/500/600 Questions
I have no idea what was originally issued with the kit? That was one of my original questions.. And, I still have no idea which length screw is appropriate. I'm new to this hobby, and maybe this isn't a big deal, but the last time I flew the heli it blew up in the air due to a cracked screw.. Now, I see there are consistencies in the parts list regarding what screw to use.. My confidencby Brianmurray77 - Logo 200/400/500/600 Questions
I received parts today to repair the exploded head.. Not knowing the Spindle Shaft included End Screws, I purchased them as well.. As listed in the manual, these screws are M4x12 Cap Screws. While opening the packages, I noticed the End Screws & Washers included with the new Spindle Shaft are shorter than the M4x12 I purchased separately. See Picture. The included screws measure abby Brianmurray77 - Logo 200/400/500/600 Questions
I've been flying my Logo 550SX 2017 for about 6 months, however, this morning while making a typical flight, the bolt holding the main blade grip to the spindle shaft snapped. The blade grips exploded away from the head and the heli crashed to the ground. Not Cool.. Attached is a picture of the snapped bolt in the spindle shaft. Any ideas why this happened? Thanks in advance for your oby Brianmurray77 - Logo 200/400/500/600 Questions
Ok cool. Thanks!! I was advised to use Carbon Fiber Servo Spacers to help secure the servos to the frame.? Yes, the (3) Cyclic Servos on the main frame. I'm assuming the spacers sit on the front side of the servo, facing the screw.. Have you used these.? SAB makes a set of 10 - standard size spacers. Thanks again for your time..by Brianmurray77 - Logo 200/400/500/600 Questions
I'm about to start my first Logo 550 build and was curious if anyone has had issues securing the servos using the provided self-tapping screws to the plastic frame? It doesn't look very secure.. Is there anything I should be aware of when mounting the servos? Or anything else for that matter! Thanks in advance for your assistance.by Brianmurray77 - Logo 200/400/500/600 Questions