Can not manage Néo EVO with soft Vstabi

Hello

Just receive a Neo EVO, i control it with a Control Touch.

I can registre it and update with VbarControl Manager, but i can not setup it with VStabi (after restart and bin with my Control Touch.

I see "Vbar Virtual Flybar Controller" in windows system; Like with a Neo V6.

Cdt

Are you trying to setup a VBar EVO with the PC Software?
(this won't work and was also not advertised)

or

Are you trying to setup a VBar EVO with the VBar Control touch?
(this should work)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

yes i try to setup a neo EVO with PC software. So ok not possible now with Evo

This was advertised in the video presentation VTV EVO 26.11.2022 21:17:13 (about using EVO with another radio, such as Futaba)


RV Wrote:
-------------------------------------------------------
> Are you trying to setup a VBar EVO with the PC
> Software?
> (this won't work and was also not advertised)

Yes, you are right, and Rainer dosent know that is actually should work. Unfortunately it has some problems we found during trying it out. So we will look into it and make it work.
To enable the PC Connection, the Cable has to be attached *after* the Unit is powered up, otherwise it will end up in the bootloader.

so long ... Uli
http://www.vstabi.de