Helicopter with retract landing gear???

How do I set up a tricycle retract landing gear It's on a Agusta 106 600 size?

VBT and NEO Vlink

Charles



1 mal bearbeitet. Zuletzt am 19.06.2020 16:37 von rotorsport.

OK I went to the Videos and I think I got it I had to put the front landing gear on a different channel so I could control the reverse and limits

I used channel 4 and Aux 1 and assigned to switch 6

I will have to do more videos so I can assign these to a flight mode

Charles

I would go as you stated:

- 2 output cells with their limits and same delay at the servo sockets
- those 2 cells are both driven by a 3-level-cell (the same for both) assigned to your bank switch, values as liked -100 or +100 for gears up/down.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.