Normal swashplate behavior

Hi

When I boot up my vbar Neo my swashplate tilts slightly to the left. When I enter “edit model setup” it perfectly levels out and when I exit it the swashplate tilts slightly to the left again. Please let me know why this may happen. There is 0 trim on autotrim

See video here:

https://youtu.be/V80INlimXHs

Thanks

I noticed that my swashplate levels correctly when I unplug the external sensor and plug it back in while the power is on. It doesn't seem to reset correctly while it is plugged into the NEO and simply power cycled. Also where do I find the settings for the external sensor in the vbar vcontrol touch?

Please help me with this..


Thanks



1 mal bearbeitet. Zuletzt am 01.06.2020 03:17 von Jsibal.

Why you are using the external sensor?
Unplug it and use the Neo without it.

Stephan

Background Info here:

The NEO initializes with the internal sensor as it is the "master" when a fallback must be done and also responsible for the Rescue.

The External one will be expected in the same center values - and if they are off - we have this behaviour. This can only be fixed by another external sensor or just fly with the internal only.

The external has a lower resoulution, so it is not needed if the heli works fine with the internal. And - as the internal one is also better in vibrating environments - it is also better use the internal ones. And ... as the interna one is used for fallback and main input for rescue - it is also mandatory that it works with the internal one as well.

So .. to sum up ... if you have a heli which needs a special sensor placement (and this was the reason for the external one) - move the NEO to a better place or cure your heli to work with NEO first.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.