New logo 800 build question

Hello,

I’m currently building a logo 800. On page 8 step 5 in the manual a 4X26 bolt needs to be put in the tail gear with the help of a sillicone tube.
Could someone help me where exactly the bolt needs to be put, please?
Is this a temporary step while inserting the main shaft?
Is it a problem if i skip this step? In the manual of the logo 700 the same action is described.

Could someone of you help me out, please?

All info is much appreciated.

Many thanks!!

Have a look at the tail drive wheel there - it is needed to get it fixed to the main shaft ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Hello Rainer,

Perfect, I found it.

Thank you very much!

Best regards
Bart