aileron/elevator mixing

Hi, i have a VBC-touch and on my 700 logo when I move the aileron to both sides it gets a little bit of elevator mixed and when I move the elevator to both sides it gets a little of aileron. Is something mechanic on the rotor or some parameter on the VBC?
Regards!

Hi,

please test in setup mode, where the swash plate servos are moving. There, the control loop is inactive, so you can see if it's mechanical.

Basicaly, we only have collective -> elevator mixing which is balanced in flight, when the model is moving freely, but which shows and looks a little odd, on the ground.

Kind regards

Eddi

Born to fly ...
forced to work.

Hi, i tested in setup mode and when i move slowly the aileron, elevator moves just a little bit and the same when i move elevator some movement on the aileron. I can't think of what to touch electronic and mechanically, the only thing i upgraded on the main rotor are shims behind the mixing arms.
Regards