Getting RPM telemetry

So I want to set up the nitro govenor on the neo. Using Futaba 14sg. Rpm sensor works fine as shows in the vbar software when in idle. But for me to set up the basic throttle etc I need to get live telemetry of the rpm to my transmitter to correctly set up the basic throttle. Is this possible? If not how else am I suppose to set up the givenor correctly? Following the instructions on vstabi states I need to use the rpm telemetry at zero degrees.

Is there anything online that's gives us a starting point for the nitro govenor?

I understand me buying a Vcontrol will solve these problems so I am planning to buy one as it will save a lot of time and stress setting. But that won't be for a month or so from now.

Well - i would use a external measuring tool like:

link to a example

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

RV Wrote:
-------------------------------------------------------
> Well - i would use a external measuring tool
> like:
>
> link to a example


Thanks RV I will get one of those until I get a Vcontrol.

Any idea if the vbar satellites will be back in stock soon? Or are they being discontinued?

I have no idea - but ongoing production keeps focus on the VBar EVO as well as VBar Control EVO - so i think it will be better to change the VBar then.

A integrated VLink has no cable, no plug in between and also uses a bit better internal power supply.
Consider also the VBar EVO is more precise, allows more servo framerates.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Hi,

as far as I know, since a couple of days, we have satellites again.
They're just not yet in the shop, as far a I know we are fulfilling backorders first.

Kind regards

Eddi

Born to fly ...
forced to work.

Thanks Eddie