supply voltage dropped...

Hello guys,

supply voltage dropped below 4.0V
rc input packets lost


These messages showed up on the Neo log.

Looks quite obvious, but I would like to double check. Does it mean that the voltage provided to Neo dropped below 4V, and, as a consequence, the connection tx-rx was lost? If so, other than a BEC problem, what could be the reason for such errors?

Thanks.



2 mal bearbeitet. Zuletzt am 09.01.2021 20:00 von ReadyToFly.

You could be on the right track, BEC, switch, cable etc.

Please attach the full log and more details of all used components.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.