How connect sim.

Dear Sir,

I want to connect my vbar touch
wireless to the next simulator.

To do that I have purchased an rx2 sim
and a vbar neo basic.
My question is how should they
be connected and set up?

Kind Regards,

Egon

Configuer the VBasic as per wizard with the right protocol for your rx2sim - connect the rx2sim to AUX1

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

I still don't understand how it should be connected.

Please can you clearify.

Kind Regards,
Egon

Please clarify more ... i don't have such a item

Where do you get exactly stuck?
Is there a manual from the sim adapter online?
Which connection is required in this manual?
Which Protocol?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Hi,

basically, you do a setup on VBasic and make it SBus for example.

Then, you connect AUX1 to –/+/1 on the RX2Sim, make it SBus, too.

Then, you should see control inputs in your simulator and can do a setup/calibration there.

If necessary, you can access Macrocells on the radio, to adjust functions from the radio, e.g. if you want special functions on switches, rotary inputs etc.

Kind regards

Eddi

Born to fly ...
forced to work.

Thanks, its working now

Regards,
Egon