Vbar touch battery

Hi there,

the biggest issue I have is:
1) the date changes EVERY time on power up. What would cause this? Not even sure where I can set this.

2) Battery monitor for the TX is all over the map.
a) When plugged into charge the red light does not turn on
b) when plugged in battery % goes straight to 100% then drops to 98%
c) after 3 hours of charging turned on charger and it turned on with 43% which dropped slowly (2 mins) to 33%.

Perhaps the Lipo just needs to be replaced. (Seems odd though that the monitor does not even work.)

Update, After charging Overnight issue #1 appears to have been resolved.

However Issue #2 still exists, after charging overnight battery still reads 47% and again slowly drops.

Hello,

i think it will be best to file a service case for Edward - just click on the service Button of this VBC in your devices list on vstabi.info and fill out the required forms.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.