Nitro gov setup

Hi, is there a video or some info on setting up the nitro gov available?
Used to be able to do this with my eyes shut but after a few years out of the hobby I seem to have forgotten!
Thanks



Edited 2 time(s). Last edit at 01/30/2021 10:16PM by tonystevens.

I would recommend:

- set up in Gov Setup throws and assign Kill switch
- in gov flight dial in a idle value

and just give it a go.

Consider the "Motor" Switch is on Stop when the motor still idles, to turn it fully off we uste the kill switch. Consider also switching from Stop to run gives a slow spoolup, switching from Auto (Idle) to Run a fast (AR recovery). So after each landing - once back to Stop please.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks think I’ve got it sussed now just need to give it a go!