Nitro Governor set-up

I'm switching a nitro Align 600 over to VBCT

Do I plug the already mounted magnet into the RPM port on the Neo?

Do I need a nitro gov app?

I have watched the videos on setup so I have some knowledge on setting up the V curve and the minimum throttle at the bottom of the curve

Charles

Hello,

the Align Magnet/Hall sensor needs swaped red and black cables:

https://www.vstabi.info/en/node/1225

Then it can be connected to the RPM port ;-)

The nitro gov isn't separate, just select nitro at the heli setup as governor.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



Edited 1 time(s). Last edit at 08/08/2022 09:47AM by RV.

Hi,

uh, am I just not yet awake, or did I miss something?

Quote:

rotorsport
Do I plug the already mounted magnet into the RPM port on the Neo?

To the best of my knowledge, yes, but

Quote:

RV
the Align Magnet/Hall sensor needs swaped red and black cables

But

Quote:

RV
Then it can be connected to the "sensor" port ;-)

no.

The "Sensor" port on a NEO is only for the optional Gyro Sensor, or it can be bridged using the boot plug, to bring the NEO into boot loader mode, for registration and updates.

Kind regards

Eddi

Born to fly ...
forced to work.