Quote:I understand that I have to remove the red wire from the master port of Scorpion to put in Vbar sensor port but what do I need to setup the ESC on PC to work with Vbar Governor
You need NOT to change anything on the master cable - it connects straight to ESC at the Vbar.
The slave must be splitted:
-RPM cable (signal wire) into RPM, signal pin
-power wires into e.g. ch4 at the VBar sockets
Setup - do it with the Scorpion PC Software, select Vbar Governor and probably your telemetry and limits.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.