Vario Scale Swash Setup

Hi there

Have a Neo with Pro with Touch

Struggling with setting up the swashplate on a Vario 1:4 scale machine

Need 45 degree swash

45, 135, 225 and 315

However no matter how I rotate the swash in the setup (using H4 and rotating) nothing works

Is it something Neo can do?

thanks

I have this swash on my Vario UH1D Turbine with PHT3-3 here too.

I start at 4*90 deg, rotate with the buttons approx. 45deg. and connect the servos at the right sockets afterwards. Nothing difficult here.

https://www.vstabi.info/forum/read.php?10,172594,page=2

There might be 1-2deg off - but this is normal in the display. We do not set the angles here to the NEO, we set the mixing ratios, so the NEO doesn't have to calculate this in flight. For display we recalc the angles - and might get a bit difference.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



Edited 1 time(s). Last edit at 04/30/2020 11:23PM by RV.

Thank you Rainer as always! amazing support