Welcome! Log In Create A New Profile

Advanced

600 nitro Governor setup

Posted by helicrazy2 
600 nitro Governor setup
April 17, 2016 11:39PM
Hi
I have My nitro setup bank one -1700 rpm bank Two -1850 bank Three-2100
all three bank work like they are suppose to work.
But When I switch from bank 1 to bank 2 I can hear the rpm drop and hear Bank 3 go up a little bit.
Bank 1 act like it has a fix rpm without any adjustment. I change the rpm for bank 1` but it stay the same?
bank 1 and bank 2 and bank 3 They Should Sound{ low for 1} {med for 2} {high for 3}
Vbar governor being used
NEO being used.
Vcontrol being used
Your help would be great Thanks Denny



Edited 2 time(s). Last edit at 04/17/2016 11:59PM by helicrazy2.
Re: 600 nitro Governor setup
April 18, 2016 01:08AM
I got it figured outgrinning smiley sorry about the postthumbs up
RV
Re: 600 nitro Governor setup
April 18, 2016 05:54AM
OK - well done, but - what was it (we always learn)?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Re: 600 nitro Governor setup
April 18, 2016 10:24AM
This is because it is doing more than 1700 rpm in bank 1 in hover. Changing the rpm in bank 1 won't make in difference as its a direct throttle ungoverned.
RV
Re: 600 nitro Governor setup
April 18, 2016 12:51PM
Ok - makes sense ;-)

in this case set up basic throttle (for throttle point az zero coll) and collective ad (for the full collective point) as you like for the ungoverned bank.

2nd image here displays it:

http://vstabi.info/en/node/2030

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 1 time(s). Last edit at 04/18/2016 12:52PM by RV.
Re: 600 nitro Governor setup
July 10, 2017 06:15AM
Where is the video on setting up a gov on a nitro using a Neo none vlink with a Spektrum Transmitter DX9 or DX8?
Re: 600 nitro Governor setup
July 10, 2017 11:19AM
Sorry, only registered users may post in this forum.

Click here to login