start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
The satellites was not connected. Thanks!by Flipper 76 - Questions VBar Control
Hello RV, thanks for the reply. I followed your instructions but was not able to install the recovery firmware update. I received a message that said "The software was not loaded correctly. The Unit is not operational.". One thing to note is that I seem to have no recognition by the computer that anything is connected to it. In the recovery update video, in the V5 software, the USby Flipper 76 - Questions VBar Control
Hello Zusammen, I need some help here: 've updated my VBar Control Online with the latest software and Vsim App. I've connected VSim as indicated, but it does not appear in my bind screen on VBar Control. PLs see images attached. I've also tried to erase and reinstall both the VSIM and the Basic apps multiple times, with no results. I've also tried to reboot the VBar Control multiples timesby Flipper 76 - Questions VBar Control
Hallo, can you use the vbar governor with Kosmik & TelMe? Thanks, Flipperby Flipper 76 - Questions VBar Control
Hello Everyone, I'm having an issue at start up on my Logo700xx, when I plug in the main batteries the NEO starts up but does not find the VBC(it lights flashing blue and then after a while switches to flashing green and red). I found out then that by playing with the ESC wires (Master and Slave), disconnecting and connecting them until the initialization on the NEO is successful would work.by Flipper 76 - Questions VBar Control
Hallo Zusammen, is there a need to update a Silverline VBar running V-Plane and another Mini VBar on Heli Pro to 6.2? Thanks, Felipeby Flipper 76 - Questions VBar Control
Danke Eddi, Wie schwer war das Äquivalent Exxtreme? Grüßle Felipeby Flipper 76 - Logo 700/800 Fragen
Hello Zusamen, on the new Logo 700, what's the max motor height in mm that fits under the canopy with the new smaller main gear? Just trying to understand power alternatives to benefit from the new main gear... Thanks very much, Flipper 76by Flipper 76 - Logo XXtreme 700/800 Questions
Hallo Zusammen, great job on the new logo 700, can't wait to get one! As everyone noticed, Kyle Dahl was flying a version with carbon lower frames, is that going to be available as an upgrade? Thanks and keep up the great work Mikado! Cheers, Flipperby Flipper 76 - Logo XXtreme 700/800 Questions
nice! is it going to be available at mikadousa soon? I also need 04636 12T for 600SX, any estimate of when that will be available? Cheers!by Flipper 76 - Logo 200/400/500/600 Questions
Thanks Greg! I think I ended up losing my files but got the radio back to working...by Flipper 76 - Questions VBar Control
Hello, I updated the new apps in my VBC just now but the radio won't turn on afterwards, it says " NO SYSTEM CONFIG", I was able to reboot it and also format it trying to get it to work before, I lost all my data and logs, guess you have to do a backup before updating in the future, lesson learned... but how do I get my radio to work now? is there a ecovery procedure for a situatiby Flipper 76 - Questions VBar Control
Thanks RV! let us know how that goes! Cheersby Flipper 76 - Questions VBar Control
Hello RV, mine is a stock 550SX V1, YGE 90LV, stock Scorpion motor, Mini Vbar with VBC, Savox servos. Headspeed is 2,100 rpm with the 15T pinion. Thanks!by Flipper 76 - Questions VBar Control
I did that and on a hover my heli would be slightly under target headspeed and in a medium climb it would be significantly over target headspeed. Could it be too much collective add? I had basic throttle at around 70 and collective add at around 60, is it normal to have values this high?by Flipper 76 - Questions VBar Control
thanks so much as always RV! Cheersby Flipper 76 - Questions VBar Control
thanks RV, but what exactly does collective dynamic do? I understood that raising that value will lead to the tail showing its limit, but what is it for or what does it do? Thanks very much as always!by Flipper 76 - Questions VBar Control
Thanks Eddi! I'll try removing the bolt first, what kind of tool would I use you mean? That I would create the hold with the dremel? Thanks, Flipperby Flipper 76 - Logo XXtreme 700/800 Questions
Hello RV, what about collective dynamic? How do I adjust it in the sequence above and in the link below? http://www.vstabi.info/en/node/2043 Thanks and best regards, Flipperby Flipper 76 - Questions VBar Control
Nice! thanks and I can't wait for the update with the app soon! Cheers!by Flipper 76 - Logo 200/400/500/600 Questions
Thanks RV, this is very helpful, and I'm looking forward to that battery saving app Is it sufficient to have each cell voltage above 3,73-3,75V after your flights (let's say, let the batteries rest for 30 minutes after the flight and then measure it)? I'm saying this because I don't have UI in all my helis and it resets on the Kosmik 200 as welll... Thanks as always! Cheers, Flby Flipper 76 - Logo 200/400/500/600 Questions
Thanks Eddi! so just use a smaller drill to try to get the broken end of the bolt out? Is the drill not going to damage the thread inside the aluminum part? Seems tricky but I'll try... What about flying with only one bolt? there's still the other 2 security ones that go through the tail boom,besides the bolt that didn't break on each clamp... Thanks and let me know what you think!by Flipper 76 - Logo XXtreme 700/800 Questions
Hello RV, I was trying my best at google translating the post pasted below, but not sure if I understood your recommendations for how to be safe with usable capacity on the batteries, can you help us with an english version of this info here? If I understood correctly: 1- One should asses the "usable capacity" of a certain battery at a certain point in time by discharging t toby Flipper 76 - Logo 200/400/500/600 Questions
Hello Everyone, I might have overtightened the bolts in the clamps that hold the tailboom in the tail case MIK04564 and in the Tail Boom Holder MIK04518. I broke one bolt in each! I think that vibration in flight finally did it, as when I tightened them I didn't notice I had broken them... but flights were normal, no noticeable wobbles or vibrations... I've flown 30 times and went to checkby Flipper 76 - Logo XXtreme 700/800 Questions
Thanks RV and Eddi! very helpful and instructional!! Cheers, Flipperby Flipper 76 - Logo 200/400/500/600 Questions
Thanks Eddie and RV, I'm unsure about the cyclic ring: what is it and how to setup correctly? Thanks for your help here! Flipperby Flipper 76 - Logo 200/400/500/600 Questions
Vielen Danke Rainier!! wir warten gespannt auf TELME ist UI-Sensor so gut und so eine Schande, dass es nicht auf Kosmik 200 arbeiten !! Cheers, Flipperby Flipper 76 - Café
Hello Everyone, I installed battery ID stickers on the side of my battteries that puff as they age, as all batteries do... As they do puff and the surface becomes curved (convex), the stickers peel out the hard plastic outer part of them, and only the grey soft sticker material underneath them stays stuck to the batteries... the other day on my 700 the hard part of the sticker layers was lby Flipper 76 - Questions VBar Control
Hello Eddie, I saw on your pictures here: http://www.vstabi.info/en/node/1968 Please also see image attached. Where can I get the washers you use between the frame and the canopy post? And also, where can I get the canopy post you have, with a safty pin at the end so the canopy won't come off? I've installed my canopy on my logo 700 as it comes stock, but the canopy is closer toby Flipper 76 - Logo XXtreme 700/800 Questions
RV, where do I find my VBC App List in my vbar control? Is it in App Setup? I first connect to the NEO and then go there? The NEO is updated with pro rescue. Where is the Status info screen in VBC? Thanks!by Flipper 76 - Questions VBar Control