start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Tja ... wird halt immer wieder gerne genommen diese Sache ;-)by RV - Fragen V5
Why not? - We fly this config in our BO 105, too.by RV - Questions V5
Das Heckservo ist auch am richtugen Slot eingesteckt? - Ganz außen?by RV - Fragen V5
Ok, and you removed the -u and selected com3 in pc soft? (the same a on the XP) Maxbe the com3 is blocked by another device, try with another com (manually assigned in the device manager).by RV - Questions V4
Welche Stabi Hardware und Firmware ist es denn? Hast Du mal ein Setupfile?by RV - Fragen V5
Ja, die V5 CP Soft beinhaltet auch die V4 Binaries ;-) Einfach auswählen ...by RV - Fragen V5
Tja mei ... das ist mir auch schon passiert .. Schnell Schnell ... und schon wars verkehrt. Ich kippe Die Lager immer auf der Welle, da merkt man sehr deutlich welches das kleinere ist.by RV - Fragen V4
have you tried without -u and set the port to the assigned com (see device manager) in VBar soft?by RV - Questions V4
Quote:Ich habe am Ende noch einen neuen Sensor verwendet und die Elektronik getauscht, die noch nicht verbaut waren und es hat auch nichts gebracht. OK, dann hat es eine andere Ursache als VStabi, gerade auch wenn Parameteränderungen des Hecks nichts bewirken. Schon mal mit mehr Drehzhal probiert? Unter 1600 ist etwas wenig fürn L500, ich geb ihm so 1800-2100 ;-) Kann man am ESC schwächerby RV - Fragen V4
Can you have a look into the device manager and post a sreenshot? Is the desktop link on the W7 in the command line without the -u (US option at the end?by RV - Questions V4
Quote:then stop binding in the control panel or dual rates in the tx? PC Software only, therefore use the cyclic ring after the 8 deg adjustment. Set it for no binding at approx. hovering collective, full ail and elev. D/R in TX has NO effect to the throws - this is our rate that the pilot wants to fly and the throw eill be done by Vbar as best as needed to achieve this rate.by RV - Questions V4
The CR won't help, this is a limiter only. The Cyclic 8deg pos is a multiplier at another part of the loops ;-) So ... follow our recommendations and set to 8 deg.by RV - Questions V5
Der Sensor MUSS aber dran sein und die Stabi korrekt bestromt ;-) Also immer so proggen wie es "betriebsbereit" wäre.by RV - Fragen V5
Use a swash with shorter bolts on the inner ring, use a head with more distance between the linkage balls ... or just set it to 8 deg and live with a compromise. Otherwise: get rid of the ratios in the PP levers ;-)by RV - Questions V5
Sorry, you have to go to a value that will give you 8 deg on our measurement step (only a measurement, not the real angles in flight). At 10 deg the heli will overshoot ;-( If a value lower than 80 is needed ... it is a compromise for the heli performance (think about Newtons levers and forces). There can be done nothing in a electronic way here if you want to do it perfect.by RV - Questions V5
Eine Frage: - war der Sensor angeslossen, die Spannungsversorgung an und die PC Software richtig verbunden? Wir könne auch englisch bzw. ich hab nen Holländer der übersetzen könnte (Roel).by RV - Fragen V5
Doesn't matter. You can always post a imange as requested and the latest setup file for analysis here. I'll point you in the right directions for sure.by RV - Questions V4
To clarify: You have a old serial silver sensor VBat with the external USB converter? If yes ... try this one: http://www.ftdichip.com/Drivers/VCP.htmby RV - Questions V4
The 4.0 section is located here, the usual link is broken at the moment: http://www.vstabi.info/en/V4 Do you have a image of the heli, we should see sensor mounting and the complete main head incl. swash/servos.by RV - Questions V4
Hello Steve, did you compare with this: http://www.vstabi.info/en/node/95by RV - Questions V4
Quote:während des Fluges immer mehr Pitch geben um den Heli oben zu halten. Könnte es ev. sein daß da ganz einfach die Drehzahl nachläßt? Hast Du mal am Anfang und Ende des Fluges gemessen?by RV - Fragen V4
Silver? - I sit a Unit with USB on board or does it habe a serial connector only? If serial => NOT the same thing here ....by RV - Questions V4
Im Flugmodus kann das nicht gemessen werden. Hier sind Regelungen aktiv welche sich bei am Boden stehenden Modell nicht ausleben können und somit ein völlig falsches Meßergebnis liefern. Wenn es im Setupmodus auch ist => Sendersacheby RV - Fragen V4
Also ich würde das beiliegende Klebetape nehmen. Klettband wäre mir zu gewagt.by RV - Fragen V5
Zyklische Verstärkung bitte erstmal so lassen. Ich vermute sogar daß wir mit dem I auf der TS um 10 Punkte runtersollten.by RV - Setups
Senderkalibrierung ist gemeint. Gain ... Heck geht 100 Problemlos. Danach nur P erhöhen TS sollte 60..80 auch gehen.by RV - Setups
Tja ... da stellt sich die Frage: Hast Du schon mal höhere Gains probiert ? - da geht noch viel mehr! Stimmen die Laufrichtungen im Schritt2?by RV - Setups
WIr brauchen hier mehr Informationen: - wo und in welcher Lage ist die Stabi verbaut? - wierum dreht der Heli, ist der Kopf vor- oder nacheilend angelenkt? - läuft der DMA richtigherum?by RV - Setups