start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Will it be possible to use the NEO included in Logo200 for use in other helis (non Logo 200) ?by mdu66 - VTV
I have check the antenna connections and both are correct. While removing the unit - I try just powering it with no other devices attached (servos) and I still get the same RX reading (low values) from the Status Screen so I will open up a Service Request. In parallel I have order a new Neo to serve as a spare - so I will request that the PRO licence (broken Neo) be transfer to the new unitby mdu66 - Café
The NEO was bought new last year. The antennas go backward each side of the tail boom and go thru a Mikado Antenna mount - the tips are exposed (1.5cm) and are at least 10cm apart from each other. Since I have change from regular length to 230mm antennas I will double check that they are well connected - and if so I will create a service request. thanks, Marioby mdu66 - Café
Here are the screenshots - distance from Heli about 30mby mdu66 - Café
I will try to reproduce and get a screenshot of the status bar when Failsafe happens. I am able to reproduce (not 100% all times) when there is no moving parts in the helicopter - so static should not come into playby mdu66 - Café
Configuration: VBCtouch (latest updates) NEO vlink (latest update) TDF with Pyro650/65 and YGE 135 Aureus at 7s (ESC set at 7v) with 300mah LiFe buffer pack MKS Servos Flew last year with different ESC without problem (just no telemetry from Jive / otherwise all was fine) Changed ESC to Scorpion Tribunus and added BAttery ID sensor. Had BEC issues (low voltage indication + BEC woulby mdu66 - Café
Ich konnte diese Konfiguration auch nicht durchführen. Ich habe TelMe geschickt, um Ersatz zu erhalten ... aber in Mail verloren!by mdu66 - Fragen VBar Control Touch
OK - so since it is dependent on Telemetry (TelMe) this is probably why the application is not showing up even if the Shop is showing downloaded/active.by mdu66 - Questions VBar Control Touch
While I wait for the weekend to try and swap the TelMe or Neo - I tried loading another Telemetry app - Fixed Battery ID and this one also is not showing up (with/without a model connected) - any clue to why this is happening ?by mdu66 - Questions VBar Control Touch
Thanks for the tip - I've check Macrocell I/O and Tel1/2 were already set for native. Hi Steff - I may call you ! Marioby mdu66 - Questions VBar Control Touch
No - nothing in the K-config PC Software to enable the TelMe except if you want to set some alarms threshold. I even try that - setting an alarm if cell is below 4.2v in the hope that it would send an alarm but nothing. Yes - mode 1 was set before mode 4 on the ESC The Jive Pro telemetry was working correctly - I was using a Jlog before with no issue The TelMe is new - I have askeby mdu66 - Questions VBar Control Touch
OK - a bit of progress - stick calibration was indeed blocking the Collective Control so I was able to Stick program the JivePro. So what is still not working : TelMe/K telemetry - not showing up when a model is connected Pitch Stick Clic - not showing up when a model is connected Of course TelMe is the main blocker !by mdu66 - Questions VBar Control Touch
Yes stick is down - I will double check calibration - but if I don't go thru this step I have correct control of the motor ... but no access to K app and telemetry ...by mdu66 - Questions VBar Control Touch
I downgraded to 1.10 and same issue ... Also checking your process to Stick Program - one connect all, power up - setup - throttle panel - set check for collective access if you mean check the blue checkbox on the right of Collective Control - this is not possible to do / tried to select it and it won't tick - now unpower esc/heli - move throttle(collective now) aby mdu66 - Questions VBar Control Touch
I did a full re-install using Welcome app then downloaded all apps again No signs of such menu when a model is connected Quote:Pitch Stick Clic - loaded and enabled - is it shown in helicopter setup menue tree when a model is connected?Quote:Alert timer - loaded and enabled - is it shown in helicopter setup menue tree when a model is connected? Got these 3 working: Quote:English speaking voiby mdu66 - Questions VBar Control Touch
I got around the ESC stick calibration by simply setting my old TX/receiver to the same PWM as the VBCt was doing and calibrating the ESC with that. Once I reconnected the VBCt/NEO - checking on the bench everything is fine. I am not seeing the TelMe/K app, the JIVE option in the Setup and of course no telemetry the JIVE. OK - will try that later tonight I would stick-program it w/o the Teby mdu66 - Questions VBar Control Touch
That is the problem. Kontronik is connected, TelMe is connected. When I create a new model it only shows 3 ESC options (Vbar, External, Nitro). I only saw once the Kontronik ESC option - that was on the initial Wizard Setup . I selected it but at the time I did not have the TelMe. Now it does not show up anymore.by mdu66 - Questions VBar Control Touch
OK - I was able to 'recover' using VBC Control Manager. I made sure I had all the apps I wanted from the store and I saw that VBC Control Manager was correctly downloading them to the transmitter. The transmitter is back to working condition - except I still don't see many of the apps Pitch Stick Clic Alert timer English speaking voice Henseilet Model Pics Kontronik ESC (evenby mdu66 - Questions VBar Control Touch
Can it be repaired from VBC Control Manager - currently stuck in Wi-Fi scanning (Wifi is running in the house). The screen is showing Start Check Wifi Search Format DIsk onlyby mdu66 - Questions VBar Control Touch
Thanks, the Neo is brand new so it was not connected to Spektrum before. I need the VBC volume data - because I deleted by mistake the content - now I have the 'rescue screen' only when I start the VBCt.by mdu66 - Questions VBar Control Touch
I tried that many time and it does not work. What about Kontronik - it is thru that JivePro with Telme is NOT supported ? Could you send me a zip file with the content your Vcontrol folder - I am afraid I remove a file by error Marioby mdu66 - Questions VBar Control Touch
Model is connected. On HF - I am being told that VBCt does not support Kontronik JivePro 1.10 (Telme) telemetry .........by mdu66 - Questions VBar Control Touch
New VBCt - I have register and downloaded apps (WiFI). The Vstabi/mydevice web site (my devices) shows correctly the apps that I have downloaded. The apps are marked ACTIVE in the VBCt but I do not see many of the apps on the transmitter including the Kontronik ESC app (no K). I am using a JivePro (1.10) with Telme. The ESC is working fine but no telemetry is shown. Apps NOT FOUNDby mdu66 - Questions VBar Control Touch