start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Try not to solder thin wires. Specialy where there is vibration. Crimp rather else it will always vibrate broken at the solder joint.by voetloos - Café
Thanks, This is pretty cool.by voetloos - Questions VBar Control Touch
Look at this video. It will help you Avanti Jet Setupby voetloos - VPlane/VBasic VLink
Thanks Rainer, Works perfect now. Another question though, When I cancel the list and select a battery from the long list batteries , I have to select the battery twice before the confirmation is required ? Not an issue but was wondering.by voetloos - Questions VBar Control Touch
Thanks Rainer. Will update later, test and report back.by voetloos - Questions VBar Control Touch
Updated and tested. Result and process. 1. Long press battery to delete. 2. Confirm that battery needs to be removed from the LIST. 3. Complete list is gone I then started selecting the batteries to create the list again. After I created 3 batteries in the list I removed the last battery from the list with the same result ? Complete list disappeared. Another question on selecting tby voetloos - Questions VBar Control Touch
Thanks Rainer, Will do update this afternoon and check. Will report back.by voetloos - Questions VBar Control Touch
Thank you Rainer. Will play around and seeby voetloos - VPlane/VBasic VLink
Hi Rainer, I will also play arround with it at my own risk. Have a great day Pierreby voetloos - VPlane/VBasic VLink
Thank you Eddi for the detail.by voetloos - VPlane/VBasic VLink
Hi Eddie, With everything stored in the neo, settings , etc the question is why should it learn a new centre ? While booting should the RX processor not start after all critical processes has started sucsessfull ? Only asking. I was under the impression that while the booting process is running NO inputs can affect the settings/ centre position. Are we learning new thing it looks like itby voetloos - VPlane/VBasic VLink
Good Morning, The following scenario exist and happend over the weekend. Touch on, power up the neo, bluue flashing. select the battery on the touch, blue still flashing, Touch bound and ready, blue flasing, move elevator stick, instant green. BUT !!! Elevator assumed a new neutral/central position, DOWN ELEVATOR. Power down the Neo. Start again with same sequence. After batt was selecteby voetloos - VPlane/VBasic VLink
Is this now removed all together ? Any specific reason perhaps ? Would be nice to know as this was a nice indication that Macrocells were loaded and 1,2,3 extenders were active and connected ?by voetloos - Questions VBar Control Touch
I see this talk is in German only ? Will there be a re-broadcast for our English speaking users ? I would like to throw a stone in the bush and project that the client base is 60% English and 40% German (if that much). I may be wrong. Never mind. This is a great(best) product. An interesting fact (as you might know). The VBar supporters club in the Southern Part of Africa has risen from 4 tby voetloos - VTV
Maybe you should try the "Lightness" feature. I tried it on a Logo 690 SV using 6S and VTX blades. Makes the response much better around the middle. I use 5% Exponential. On my Gaui X that use 12S and which is much heavier, it makes the heli feel very light which in affect makes it more responsive around the middle.by voetloos - Setups
Eddie's suggestion would be great. Maybe in the next release ?by voetloos - Questions VBar Control Touch
Use Auto-trim as RV suggest. Make sure the CG is perfect. I fly a Sebart Katana 2M electric and it worked 100% All my plane are auto-trimmed.by voetloos - VPlane/VBasic VLink
Hi Eddie, Yes, that is what I saw on the website. I will send a photo of mine later. Must be 690 SX V1.75 as I bought it from a German guy who never built it. Also did not have a battery tray.by voetloos - Logo 200/400/500/600 Questions
Hi Eddie, My OWB cage never had a brass ring ?. It also has a step at the bottom which the one one the website don't have ? I replaced the bearing 6 flights ago and had these change direction on me in a flight. My first forced Autoby voetloos - Logo 200/400/500/600 Questions
Good Morning, What is the best way to line up the 2 One Way Bearings for a 690 SX when it is replaced in the hub ?by voetloos - Logo 200/400/500/600 Questions
Hi Rainer, Nothing came loose but your observation lead to a One Way Bearing that switch direction. Could only happen when I gave full collective. Will replace the OWB and see. Regards Pierreby voetloos - Café
Hi Rainer, Thanks. I will have a look. Up to now was trying to find a electronic error. Will look for mechanical now. cvby voetloos - Café
We heard the motor cutt and I the switched off the motor. I see at 34 sec the Aileron out of range and then the motor cutt. The motor cutt was before I "landed" in a vintardby voetloos - Café
I cant find anything in the log from the neo. Attached is the logfile down load. Does not help much. What happened : Took off normally Started forward flight and pitch forward and full collective. Motor just shut down. Made safe recovery. Tying to determine the cause of the motor fail.by voetloos - Café
OK. Deleted the device in Windows. Is working now. Thank youby voetloos - Café
New Neo, Updated from version 6.3 to 6.4. Then tried to connect to Setup Program. Same result. Short green then red.by voetloos - Café
Hi RV, Downloaded keyfile to make sure. USB goes momentary green then red. If I run the Manager and Boot plug it connects perfectly. I can even do pdates.by voetloos - Café
Hi RV. In my list of devices. I could download the keyfile again if it will help. NO Bootplug Has power and works perfectlyby voetloos - Café
Hi, I had a mishap yesterday and are trying to download the logfile from the Neo. I re-installed the software and driver from VStabi. When I power the Neo and the software is open it momentarily connect. The immediately back to disconnect. Please helpby voetloos - Café