start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Hi, Just hovering the Logo 200 is it normal to get a 19.09.2020 15:41:01 Error;Extreme Vibration Level in the logs? Now reading the loggs some more I’m guessing it is just the rotor speed startups that gets registered as high vibration levels.von anders_norlin - Café
RV Wrote: ------------------------------------------------------- > Okay - this isn't stored in the NEO - so i can't > assign it. The only thing is to name the model > according to its loaded Setup. Ok so if I load and save setups it is saved/loaded from the cloud on the current model in NEO? I can have several models with different setups stored on the NEO? Each model can thenvon anders_norlin - Café
angeljr Wrote: ------------------------------------------------------- > Perhaps rename the model slightly? > > I have 730E_F3C, 730E_SPEED, etc. It's just an example and I don't mean model name. I mean the name of the saved/active setup configuration for the model.von anders_norlin - Café
Hi, Did not fit on right side, put it in front with short cables instead.von anders_norlin - Café
If I have several setups for a model, like Logo_current, Logo_default I would like to be able to see the name of the setup that is loaded(active) in the display. Just for ease of mind that I'm using correct setup. Just a textfield with the setup name.von anders_norlin - Café
Can I have an item in the UI to see current loaded setup name for my model? I would also like to add Lightness parameter to the UI, but it's not available.von anders_norlin - Café
Hi, Is it possible to get access to the SDK for app development for VBCt?von anders_norlin - Café
https://uroehr.de/vtube/video/chinook-fullvon anders_norlin - Café
Would it be possible to make an app that can Program S.Bus servos with VBCt?von anders_norlin - Café
thomas1130 Wrote: ------------------------------------------------------- > Hmm - Strom - und somit Verbrauchsmessung wäre > schon sehr interessant - zumal man bei dem Kleinen > gerne unterschiedliche Drehzahlen fliegt, und > somit unterschiedliche Flugzeiten hat.. > > Die Lösung unter der Kufe dürfte auch vom > Schwerpunkt günstiger sein, da wir eh schon eine &von anders_norlin - Café
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi Anders, > > a wee word of warning: when soldering the sensor, > keep the shunt tidy: the wire or enough solder > must connect to the wide surface, but there is a > tiny pin on the inside, which must not be covered > with solder, else the sensor will no longer show > correct values.von anders_norlin - Café
Great inspiration. I will try the combination between the two and put it under the skids with black wire and thinner measuring wire. Thank's Andersvon anders_norlin - Café
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi, > > I have prepared a spare one which I plan to mount > where it belongs, cutting the black wire to the > ESC, soldering that to the shunt, and only > connecting it with a separate servo wire lead to > the passing red wire/connector (is only for > reference/measuring voltage, anywvon anders_norlin - Café
Sky Wrote: ------------------------------------------------------- > Hi Anders, > > works with the U/I Sensor perfect. Change cable on > it. So it is lighter. > Flighttime between 4:30 and >6:00 > > I use 85% of 650mAh LiPo. Hi, That looks perfect, I'm going to do the same. Thank's, Andersvon anders_norlin - Café
Thank's need to get one of those U/I sensors I think.von anders_norlin - Café
Ok, thank you very much for the explanation.von anders_norlin - Café
Hi, Can someone explain the Hover Offset-Set Offset in rescue settings. What does it do? When and how to set it? Thank's Andersvon anders_norlin - Café
Hi, Is there an ETA on the smaller version of the U/I sensor for Logo 200? Maybe also possible to make a smaller version of the Battery ID Sensor and Battery ID Tags? Thank's Andersvon anders_norlin - Café
What is the purpose of connecting an external gyro sensor to NEO Vlink? Is it for redundacy? Is the sensors in the ext gyro better? Thank’s Andetsvon anders_norlin - Café
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi again, > > great. By the way, the little robot community > reported nothing like it, there, it seems to have > worked all the time. > > I had that issue all the time, but knowing it, I > just used the bright theme if necessary. > > Kind regards > > Eddi What ivon anders_norlin - Café
Thank,s it’s working fine in iOS 14 for me to.von anders_norlin - Café
Yes it would be better not to invert the subline and keep it gray text on white background. Using Camera device in iOS device I get nothing on the Dark Theme QR code. Thank's Andersvon anders_norlin - Café
Hi, QR code to Shop->Appstore is not working in Dark Theme.von anders_norlin - Café
Hi, Yes I have the HomeZone and it seems to work when using manual method to switch it on/off to get different settings. I will try to see if I can get it to work automatic between Home Wifi and hotspot. Thank's.von anders_norlin - Café
Hi, when I set different settings under Settings-Appearance Brightness Minimum = 20 Volume Click = 20 System = 32 Telemetry = 45 Timer = 45 It resets to default values after a Full Off of transmitter. What am I doing wrong? Volume Click = 32 System = 32 Telemetry = 32 Timer = 32von anders_norlin - Café