start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Hi All With a VBC the orientation of the Mini Neo on a Logo 200 cannot change although the Mini Neo is mounted as per factory. Any solutions, VBC is fully updated. Cheersvon Vinger - Logo 200/400/500/600 Questions
Hi If you have ordered this from Mikado USA then the voucher code is attached to the box by means of a sticker. You then use this voucher code to upgrade your Vbar Neo. Cheersvon Vinger - VBar VLink
Hi Eddi Problem was resolved by fitting a new Neo as the master Neo in his setup. So all good now. The Neo is now fitted to a heli and performs perfectly. Cheersvon Vinger - VPlane/VBasic VLink
Hi Rainer All sorted now, doing a new setup here on a VBar Evo also fixed the poti use, same with the customer in the US. Thanks for the support. Cheersvon Vinger - Questions VBar Control
Hi Rainer Success at last. Did a brand new setup on the Neo for a nitro heli. With my original switch assignment the nitro idle can now be adjusted via any of the potis. (SAFETY and PAR LOCK on switch 1) It still does not work with the Vbar Evo but will do a brand new setup on it as well and report back. US is sleeping now so will talk to the customer later today/evening our time. Cvon Vinger - Questions VBar Control
RV Wrote: ------------------------------------------------------- > This needed to be removed for "straightening" the > throttle handling in general before VBC touch > release. > > So - just open the idle panel and rotate a poti, > this assignes for the current flight. Is this comment still valid?von Vinger - Questions VBar Control
Hi Rainer As previously mentioned, I did set the PAR LOCK on it's own switch (switch 3) and it does show in the switch assignment menu that it is working. Connect to Neo or Evo with nitro gov and still no idle adjustment possible. Your screenshot shows exactly the same as mine, PAR LOCK OFF and SECURITY ON so no difference there. I think we are on a discussion to nowhere or going invon Vinger - Questions VBar Control
Hi Rainer No it does not pick up the IDLE setting. Just my observation on the VBC, the padlock is only for the safety switch and the PAR LOCK does not change the padlock. If I remember correctly from previous use of my VBC that has always been like that, the THROTTLE value on the home screen shows the padlock inside the bar until you go to safety OFF. The PAR LOCK switch does not change thvon Vinger - Questions VBar Control
Hi Rainer padlock is open with safety switch on. I have used it like this since it came out and also on my VBCt and VBCe. So my use is SAFETY ON and PAR LOCK OFF in then I can adjust parameters like nitro idle etc. Once ready to fly I switch SAFETY OFF which then locks the PAR LOCK so that no parameters can be adjusted while flying. I have not formatted my VBC so we can continue with thevon Vinger - Questions VBar Control
Hi Rainer Attached are the switch assignment. Will format the my VBC again later today and revert back if anything changes. Thanks again Cheersvon Vinger - Questions VBar Control
Hi Rainer Yes I have parameter lock active on my VBC but I do have it open when trying to select the IDLE setting. It does not work on the gains either. PAR Lock switch and SAFETY switch is active for flying, but with MOTOR off I have it switch to SAFETY ON and PAR Lock off. So it should be working on the ground when you want to start the nitro motor with MOTOR OFF and PAR/SAFETY set to OFFvon Vinger - Questions VBar Control
Hi Rainer We can work with mine serial# 10001055 Version 1.1-1132. Will get the version from the customer in the US later for you. Cheersvon Vinger - Questions VBar Control
Hi Rainer Thanks, we did check the space and there are no screenshots and only about 5 models and batteries, so ample space on the VBC. Did check through macrocells that the potis work as they should, but the poti 1 or 2 cannot adjust idle global setting at all. Did check that macrocells were cleared and Neo or Evo were restarted. This has me stumped for sure. As a last resort I formattvon Vinger - Questions VBar Control
Hi Rainer Thanks for the effort. With my own VBC and a Neo with VBar gov nitro selected it does not take the potis for the idle setting global. The VBC is fully updated to 1.1-1132 and the Neo is fully updated with a valid setup. The customer in the US have the same problem with it, also fully updated. Maybe I am not understanding the setup. There are no place to activate the potis in the TXvon Vinger - Questions VBar Control
Hi Rainer Any update on this as the customers are asking about it? Thanksvon Vinger - Questions VBar Control
Thanks Rainervon Vinger - Questions VBar Control Touch
Hi Rainer Thanks for that but it is a bit confusing as the function is called COPY Will have to look into the cloud recovery as I have not seen that function anywhere. Cheersvon Vinger - Questions VBar Control Touch
Hi All If a user have both a VBCt and VBCe(new) and wants to keep using both transmitters the data needs to be copied from the Touch old to the new Evo. The problem is that although all copied data shows in the cloud when looking at the VBCe but when you now connect to a Neo that had pics and timers all set on the Touch it is not on the VBCe, even selecting the pic for the model again (avavon Vinger - Questions VBar Control Touch
Hi Linus was the developer of the app and is not an official Mikado app. Development stopped nearly 4 years ago and the latest VBCt and VBCe data are no longer supported. https://www.helifreak.com/showthread.php?t=695242&page=13 Cheersvon Vinger - Café
Hi Rainer That is how it used to work but not anymore so somewhere things changed as it is currently not possible with a fully updated VBC and Neo or Evo. Can you please check your side maybe something changed in the software.von Vinger - Questions VBar Control
RV Wrote: ------------------------------------------------------- > Pleas use the "Parameter Modify" App ;-) Hi Rainer I know this is on the VBCt/VBCe but cannot find it on the VBC. Looked at the shop but there are no app for the VBC with that name. Hints on where to find it on the VBC please? Cheersvon Vinger - Questions VBar Control
RV Wrote: ------------------------------------------------------- > This needed to be removed for "straightening" the > throttle handling in general before VBC touch > release. > > So - just open the idle panel and rotate a poti, > this assignes for the current flight. Hi Rainer It seems as if the pot adjustment is no longer available for the global idlevon Vinger - Questions VBar Control
Hi Auggie Eddi have indicated that he have logged it with their service provider. So let us wait and see when it gets fixed. Petervon Vinger - Café
Yes all VBar Control transmitters can be mixed for buddybox, from the Classic to the Evo.von Vinger - Questions VBar Control Touch
agilefalcon Wrote: ------------------------------------------------------- > In the end, I used a different app to scan the bar > code. This one provided just the URL that I could > copy and paste into the Safari browser on the > iPhone. > > I think the process is unnecessarily convoluted. > Why can't there be a simple link within your > account to register the rvon Vinger - Questions VBar Control Touch
RichardV Wrote: ------------------------------------------------------- > Thanks Peter. I'll look into vplane, but I don't > think macrocells are backed up to the cloud. > Rich Hi Richard The macrocells are backed up to the cloud under setups if the user have saved them to his VBCt/VBCe they are normally of the same name as the setup file but the saved files are named by the uservon Vinger - Questions VBar Control Touch
Hi Richard, thanks it works great for all my helicopters, but not for any Vplane setup or macrocells setup, maybe look into expanding it to those setups.von Vinger - Questions VBar Control Touch
Eddi E. aus G. Wrote: ------------------------------------------------------- > Hi, > You can dial in auto trim values for tail, to > adjust center (for setup), this is probably the > answer to your question, so yes. > > —Eddi Hi Eddi The problem is the auto trim values are not used while in setup mode, have had the question from a customer and I pointed him to thivon Vinger - VBar VLink
Hi All Any answers on this?von Vinger - VPlane/VBasic VLink
Thanks Rainer. Maybe update of the information on the site should be considered as lots of people are following the setup guidance here. Cheersvon Vinger - Questions VBar Control