start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
cant recall the distance off hand and im not home but I am positive that it is the distance the manual states. Also these are servo horns that come with the kst rudder servo. I shaved as much as I can off the horn before it starts to weaken. I see others have shaved the frame as well so I guess this is what ill have to do even though I hate to start filing my new heli frame .by stevin - Logo 200/400/500/600 Questions
as the title says this is my newly built logo 600 sx , this is the first version of the sx. The tail control rod rubs against the frame above it when the tail reaches its limit nose right. I havent noticed any issues it flight but I have always understood that tail linkages should be buttery smooth and any hicup is not a good thing. Has anyone else had this and is there a mod to prevent it?by stevin - Logo 200/400/500/600 Questions
Are things looking good or are they on the sidelines for now? The video I seen it in was a year and a half old.by stevin - Café
I was watching a video showing kyle dahls radio at a funfly and when Ron from Mikado went through his radio under applications he had an app called "Player Control" and states that this allows control of remotely playing music from your phone or other device. I dont see an option to install this app and cant seam to find any other information anywhere.by stevin - Café
thats great to know, I did notice a metal band securing the battery. Obviously I would not be able to use this band with an additional battery. How do you suggest I secure the two packs?by stevin - Café
I just opened my touch to tighten the sticks and I see there is another port just like my regular vcontrol. My question is this. I currently have two batteries in my regular vcontrol and since this is now gonna be a back up. Is it the same size so I can take one and install it as a second battery inside my touch?by stevin - Café
I was able to add the picture, since it was a newly bound model it wasnt showing up in my cloud at first but when I rechecked later it was there and I was able to add my own picture. However I can not assign a trim tab to idle with the legacy vbarby stevin - Café
This question is about vcontrol touch. So im not seeing an option for assigning the trim tabs to nitro idle on a legacy vbar with VBC satellite. Also seams I cant add my own picture to the flight screen. Is this something that can ONLY be done when using a NEO?by stevin - Café
figured it out, I was uploading at the top of the cloud page and that wasnt working but if I uploaded under last model overview for the specific model it worked!by stevin - Café
having a little trouble changing the picture on my flight screen. I uploaded the picture to the cloud, I now see it on there, then I removed the stock pic, new and follow the menus until I get to "own pic" the box comes up but its BLANK. I tried shutting the model off and back on as well as the radio and still nothing, any ideas?by stevin - Café
I have been playing around and I figured out how to use the neo software to do the setup and I see it gives me the option to choose s-bus or universal rx hook-up. Does this mean that he can use the JETI with it on 6.0? If so then going back to 5.3 wouldnt be necessary. Hopefully someone gets back to me soon.by stevin - VBar VLink
I have a brand new vlink neo that I am giving to a friend to try out. He flies JETI so it will have to revert back to the 5.3 firmware. Does anyone have a link or can explain step by step the process to do so.? I just registered the NEO, where do I go from here?by stevin - VBar VLink
I have some nice aluminum horn I wanted to use on cyclic but the closest hole is 18mm out from center and the manual asks for 16mm. Can I get away with using the 18mm holes? will it screw up my geometry? anyone using 18mm?by stevin - Logo 200/400/500/600 Questions
thank you for enabling my license key. So I was able to finally connect and use the recovery file. After that was done I was able to access the vbar through the 5.3 software. I was a little confused as to what to do next so ill explain what I did. I first plugged up the sat and turned on my vcontrol and attempted binding with no success, I hit bind and nothing. Then I hooked back up to 5.3 softwaby stevin - Café
This is the 4th time I requested the License key for this vbar and have not got a response? I just requested it again. I think this is where im stuck but I cant do a single thing until this license is sent to me.by stevin - Café
As a matter of fact I had the sensor plugged in and the vconteol sattelite. Should I attempt this without the sat? Don’t I still need the key file?by stevin - Café
I decided to give Vplane a go in a small foam wing elevon jet. I grabbed my vbar from my box and thought I could simply set up a model as a plane but when scrolling through the apps in my vcontrol I realized that I could not just click on it and check the box. I went to my devices and clicked add vplane version 1.0, however I cant get the vbar to communicate with the site . I tried using the recoby stevin - Café
it looks like my RX signal is way down. Not sure why?, also posted a picture of the way my NEO is mounted and the heli itself.by stevin - Café
ok i think I did it correct, these are the 3 logs that seams to show the crash and incidents If more of the files are required please let me know and I will attach them as wellby stevin - Café
to add log, do I just copy from the vcontrol and attach here? also what do you mean by full data?by stevin - Café
So a strange issue has come up on one of my helis. a few weeks back during a hurricane the motor shut off but I was able to still control the servos, just from instinct I kept the heli inverted in the hurricane and luckily it came back! lol My log shows RC INPUT PACKETS LOST, followed by FAILSAFE ACTIVATED. I assumed this was due to be having the antennas zip tied to the boom and not using the 90by stevin - Café
I think I am having the same issue, same thing happened to me where the motor shut off in prior flights. One flight it came back and I landed, the second I crashed the heli. My log shows exact thing rc packets lost and then failsafe initiated. This is on a trex 470LM belted model. I am using the align cyclic servos with align motor and esc.by stevin - Café
switch module this is what I believe you are referring toby stevin - Café
when you say I will need a switch module, can you please give me an example? I thought I was be able to use a channel to open and close the circuit but I guess im wrong. Do you see any issues with me using two separate lipos? will one not affect the other and trickle into my servos?by stevin - Café
I am in the process of wiring up my night rig. It is a trex 600 pro which is 12s, im using old school futaba bls451 on cyclic and bls251 on rudder. I have an arizona regulator thats taking my 2s lipo down to 6v to power all my control surfaces. Now heres where Im unsure. The lights on my heli are powered off of a 450mah 2s pack. What I would like to do is, turn the lights on/off via the Vbarby stevin - Café
is there a way to tell if I can do the vlink upgrade to a NEO without opening the box and plugging it in? I won a NEO at a raffle and it is the non vlink type but I been converting my fleet to all vlink. I would like to do the upgrade adding antennas if possible but if not I would like to just sell it and buy the vlink type. If I do sell it I would prefer to sell it as unopened, hence my questby stevin - Café
I retired a few packs but kept the battery ID tags, can these be reassigned to use on other packs?by stevin - Café
I was at a funfly this weekend and heard from two separate people that the newer aluminum cased vcontrols are faster then the original plastic ones. Any truth to this or is the case the ONLY difference?by stevin - Café
I agree, seams it would be easy enough for mikado to give us a page that shows flight counts for each model as well as an actual battery usage count. Could even expand and note when a part was swapped so the number of flights can be logged for that part.by stevin - Café