start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Hi Guys So i spoke to a team member and ordered and paid for the sensor via the paypal address you provided but ive not heard any confirmation from your team even following and email asking for conformation. Can you confirm the team have received this and any tracking info please. Andyby andypaddlerking - VBar VLink
Hi Is it possible to purchase replacement external gyro sensor cases as one of mine has a crack in it so i want to replace it so the board wont move in the case and can be firmly attached? Thanks Andyby andypaddlerking - VBar VLink
Hi guys I hope your all keeping well. I'm trying to find a battery ID reader but literally nowhere has any stock. Cn you confirm when these will be available again? Thanks Andyby andypaddlerking - Café
do you know what the maximum value for i gain setting is using the vcontrol?by andypaddlerking - VBar VLink
Hi Guys Ive been playing with my main rotor i gain value recently and ive been finding that increasing i gain has delivered a good result during piro flip, reversals, rolling loops and circles. currently im up to a value of about 90 on a 700 running 2140rpm and 50 on head gain. My question is what will be the negative affect in flight performance if my i gain is to high? Thanks Andyby andypaddlerking - VBar VLink
i may have found and solved the issue! ive changed the power leads from the rx battery to the vbar and im not getting warning anymore. ill test over the next couple of flying days and let you know if i have any further issues. out of interest a friend asked me if there is anything wrong with using hot glue to glue down the vbar? cheersby andypaddlerking - Café
ive opened a service request for both unitsby andypaddlerking - Café
ive tried this and it seems ok no warningsby andypaddlerking - Café
im getting the warning all the time now when the engine is running even in idle on the ground i feel it may be a vbar issue and both of my unitsby andypaddlerking - Café
Hi I've tried the cable as you have suggested on no change in the logs still plenty of checksum errors!by andypaddlerking - Café
so just a cable from the negative part of the ignition to the negative battery terminal?by andypaddlerking - Café
hi no there is no connection there would you suggest putting one in? thanksby andypaddlerking - Café
Hi So still no improvement in the situation. i have changed the ignition module including lead and cap, new spark plug and still no change can you please provide guidence please as im still grounded until this is resolved.by andypaddlerking - Café
what exactly should i be checking for?by andypaddlerking - Café
hi Yes i have tested with a full size silver line and blue line vbars. What would be the solution here. i already have the sensor mounted at the rear of the air frame and spark plug lead is at the front, the main unit is also mounted at the front. Would a ferrite ring or two help at all? Thanksby andypaddlerking - Café
hi im getting a lot of sensor data checksum errors on my gasser 700 heli. ive tried putting a different sensor on it and it didnt seem to improve. ive tried putting a different vbar main unit on it that did not help either. The heli is un flyable like this as it causes the servos to suddenly jump randomly in flight on when spooled up. From what i can tell from the logs it doesn't seem to haby andypaddlerking - Café
updated and is now working properlyby andypaddlerking - Café
Hi guys I've found a glitch in the new update. The vbar control shows only 0 rmp setting in the nitro governor menu after the update i did today. it just reads 0 on all banks and all the time no matter what i do on the slider. im using a v1 vcontrol on a silverline vbar on a gasser 700 which only shows 0 rpm on my electric 700 the rpm reads in a - value like -2000rpm. Can you pleaseby andypaddlerking - Café
Hey guys I just wanted to let you know that i got the esc all sorted out once I added the mikado battery id reader to the system. Now all works perfectly! Thanksby andypaddlerking - Café
hey guys thanks for all your help! Iv'e ordered a battery id reader and tags so will give this a go. I'll let you know how i got on. Andyby andypaddlerking - Café
so if i buy the id reader this will definetly work? thanksby andypaddlerking - Café
i thought you said in an earlier message that you would be allowing it to work with the original vbars. the ui sensor worked ok so why not this?by andypaddlerking - Café
why wont it work on the original vbars?by andypaddlerking - Café
Hi im not running any other telemetry item on my heli and i dont have any others to try this with.by andypaddlerking - Café
the esc is running the 04.0.08 the esc was purchased a month ago. the vbar logs look like normal no warning or abnormal entriesby andypaddlerking - Café
i also just did a bench test and the esc with the cable disconnected doesn't run properly the governor is hunting all over the place!by andypaddlerking - Café
im also getting no hobbywing icon showing up at any pointby andypaddlerking - Café
hi im using a silverlineby andypaddlerking - Café
hi so im having issues with this! ive updated the esc to the correct vbar version. ive updated my classic vcontrol and installed the new hobbywing app. installed the new connection wire. im finding that with the telemetry wire connected the esc wont initialise properly and shows no telemetry but with the cable removed the esc works like normal but with no data! ive reset the endpointsby andypaddlerking - Café
do you also know if the new firmware for vcontrol integration will work with the align versions of the hobbywing esc as they come with all the align kits from factory now? thanksby andypaddlerking - Café