start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Thank you Rainer !! I uploaded a log file and emailed it to Mikado. Thank you Ken Meidingerby Freeskiken - VPlane/VBasic VLink
Hi I bought a mini vbar from a guy and want to register it to my account so I can use it with Vplane. I hooked it up to 5.5 desktop software. I recorded the serial number. Then I went into my devises on vstabi.info and entered the serial number and tried to register it to my account but it will not. It gives me a message "Former owner mail address does not match." Can you please helby Freeskiken - VPlane/VBasic VLink
I reversed the numbers. Now 120, 60, 0. I moved the servo arms. I reversed the switch. Set center. Then I could go into the elevator expert mixer and add a value to the Flap / Mix. dir. and it works !!!!! Thank you !!!! I really appreciate the help. I would never had figured this out by myself. I am going to keep watching the MC videos, reading and trying to learn MC. I guess it takes expeby Freeskiken - Questions VBar Control Touch
OK I changed MC27 to 0, 40, 120 . Adjusted the servo horns and the flaps work properly. What do I do to get some elevator to keep the nose down when I engage the flaps. If I go into the expert mixer for the elevator and try putting in a value for Flap Mix / Dir. it changes the angle of the elevator with the flaps off.by Freeskiken - Questions VBar Control Touch
I hooked the VBC-T to the computer and downloaded the MC file. Thank youby Freeskiken - Questions VBar Control Touch
I saved the MC file on the VBC-T. It didn't show up on the cloud. Is it supposed to show in the cloud ? I have attached the setup files for the Tundra. I will attach the MC file tonight when I get home.by Freeskiken - Questions VBar Control Touch
I saved the Setup and Macrocells on my VBC-T radio. The setup file shows on my VBC-T cloud. I don't see the Macrocell file. When you save Macrocells does the file save to the cloud ? Can you send the files from the file in the cloud ? I will download them tonight from my radio and send them to you.by Freeskiken - Questions VBar Control Touch
I went to the expert mixers for elevator. I tried changing Flap Mix. / Dir. from zero to different numbers but it changes the elevator flap from its level position, without the flaps engaged?by Freeskiken - Questions VBar Control Touch
I figured out how to program the ESC so now I can turn the pot in one direction or the other to get the motor to run in either direction. I have the flaps working with the correct amount of deflection. And I have the buddy switch set to activate the auto trim for the first flight. Could you please help me with how to add some elevator in to keep the nose down when I activate the flaps ?by Freeskiken - Questions VBar Control Touch
Hi, I had a VBasic RX in my Tundra Plane. I changed to a VControl Touch TX. I updated my VBasic RX to Neo and loaded VPlane. I made a platform in the plane to mount the Neo front to back. I went through the setup. I picked std. plane with flaps. I have the correct directions and setup the flaps. I have a few questions on setup. How do I mix in some elevator when I put the flaps on ? Some piloby Freeskiken - Questions VBar Control Touch
I am still able to add apps via wifi.by Freeskiken - Café
Thank you. I have opened up a RMA. I registered my radio by computer and VBar control manager. This does not affect future data updating in my radio ? The radio will still update via wifi from now on ?by Freeskiken - Café
Here are some pictures of the damaged screen. Came like this cracked internally from new.by Freeskiken - Café
Hopefully it’s OK. The only way I could see to register the VBC T was to hook it up to my computer and log into my account. I register it to my account. Selected the apps I thought I need for now. Then hooked it back up again to VBar control manager and uploaded the apps to the radio. Hopefully it will update automatically through my iPhone wifi in the future. I created a service ticketby Freeskiken - Café
Hi, I just received my new VBC Touch. I took it out of the box when I turned it on the screen is cracked from the inside. All around the cracked part the screen is black. I started to set it up but then I thought I should not register it to me since it’s brand new and may have to go back. I talked to the company I bought it from and he talked to Mikado USA. They said I should start a RMby Freeskiken - Café
Hi Eddi Thank you !!! I received a new voucher. I guess the number was on the first service report that was emailed to me and I didn’t notice it. Sorry. Thank you for the great service as always. (Can’t wait to get my new VControl Touch !!!) Thank you Kenby Freeskiken - Café
Hi Eddi I checked the paperwork Mikado sent with the VBar Neo. There were no numbers written on it. I scanned my invoice copy and emailed service@mikado-heli.de on Friday. I haven’t received a reply yet. Hopefully they will send me a voucher. Thank you Kenby Freeskiken - Café
Hi Rainer I received the repacement VBar Neo VLink. Now how do I get the voucher to replace my Pro and Rescue software ? Thank you Kenby Freeskiken - Café
The first helicopter it was on was a Logo 600SE. I had static wires installed and I checked for continuity and I had a reading. It always worked on the Logo 600SE. I removed it and installed it on a Synergy 766. Shaft drive.by Freeskiken - Café
Hi, I have a older V1 VLink Neo that I removed from one Heli and installed on a new frame. On the maiden for the new Heli it had RC packets lost and went into fail safe. As I was autoing down the motor started back up and landed safely. I did another test low to the ground and it went into fail safe again. I brought the Heli home and installed a new Neo...set it up and it is flying great.by Freeskiken - Café
Thank you so much !!!!! That works great. It has taught me some about macro cells. I need to learn more. Thank you Kenby Freeskiken - Café
Hi Rainer Enclosed is the latest file. Thank You Kenby Freeskiken - Café
Hi Rainer I don’t have any experience with planes. Maybe this will work fine ? I really appreciate the time you have taken to help me. Kenby Freeskiken - Café
Hi Rainer I set it up like you prefer. With cell9 at -100 0 100. Then I set up cell27 to 3 level 0 50 100. Then cells aux3 and channel4 to curves. I had to reverse the curves again to get the correct servo travel direction. This works for the switch and correct direction. I set cell 27 to 0 50 75 to get the travel correct. I was able to get the flaps to equalize in each switch position byby Freeskiken - Café
Hi Enclosed is the file. Thanks Kenby Freeskiken - Café
Hi Eddi I reversed the curves and it reversed the servos so they move in the correct direction now. I change the limit to 85 and the throw to 45 in cell 9 to get the correct amount of throw for the flaps. But the elevator is not compensating correctly. It compensates when the flaps are level. When the flaps are lowered the elevator moves to center. I tried a positive and a negative number forby Freeskiken - Café
I just composed a message and it blocked me as spam ?by Freeskiken - Café
Hi Rainer I watched some more of the macrocells training videos. I set the 3 point curve up on new macrocells for channel 4 and aux 3. But my servos are moving the wrong direction. Point 5 on these new macro cells controls the amount of overall travel. What do I reverse to get the servo to reverse ? I can’t change the flap cell 9 limit and throw because we need a positive number for theby Freeskiken - Café
Hi Rainer Enclosed are the files. Thank you Kenby Freeskiken - Café
I am just learning to setup my first plane with a VBasic receiver. I followed the tutorial video in how to setup flaps on my new Tundra plane. I used the example and set the travel to positive 120 in macrocells 9. But I don’t have enough travel to get the flaps to move enough. They move about 25 degrees for the first position and about 40 degrees for the second position. For channel 4 and aux 3by Freeskiken - Café