start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Hello, I have tried to transfer the ownership of a silverline using the previous owners email and the serial number of the device. It appeared to work OK but it has not appeared with my other devices. Ericby ironman49 - Questions V5
Hello, Is it necessary to connect the negative of a receiver battery to the negative of a motor battery if so why? I am using a neo with vbar control and a castle ice2 HV120 ESC with no BEC. Receiver battery 2S LIPO motor pack 12S LIPO. Ericby ironman49 - Setups
This is a neo with express. I am trying to follow the instructions on the web site for castle helimode with castle bailout but can not get the screens show on the controller shots.Governor menu does not show Gov Mode then ESC Endpoints, does this require pro appby ironman49 - Café
when I go to Governor in My vBar control radio menu I do not see Gov Mode.I am trying to set up a castle escape that is already programedby ironman49 - Café
When I start the Vbar control manager I get the message virtual box software not installed. My devices are registered. I want to connect to buy some apps.by ironman49 - Café
Hi, The app is loaded in my transmitter how do I get it to work. It is in enabled apps with a box with a cross in but unlike some others there is no dot by it. Ericby ironman49 - Café
Thanks Eddi, VBar Basic setup v6 installed . I have one neo with separate gyro will this work with this . Ericby ironman49 - Café
Hi, Connected my controller to vbar manager followed by neo screen picture attached is after disconnect. Tried to connect transmitter and neo Von neo green but transmitter screen shows NOT CONNECTED. Ericby ironman49 - Café
Hi, Since registering my controller it no longer connects to any of my neo's.If I bind the model name appears but when selected it does not initialise or connect. Logs appears to say initialisation failed. Help, Eric.by ironman49 - Café
Hi, Success with my vbar controller now fully updated and clock set then registered using an old PC running window8 Eric Corkerby ironman49 - Café
Hi, I'm going to get another PC up and running that has windows 8 on it. The neos that where connecting now have a problem since I installed the virtual machine they connect and disconnect continuously. Ericby ironman49 - Café
Hi, Loosing my sanity here, if I ever had it. There is no Vbar drive with any letter with or without the Vitual machine running Ericby ironman49 - Café
OK learning my way round see screen pictureby ironman49 - Café
The original pictures are from settings and device manager. This is file explorer. No vbar shown. I have installed the work around. Do I have to turn it on? Ericby ironman49 - Café
Hi, Are these any good. All taken with neo connected to PC that will not connect to manager. Ericby ironman49 - Café
Picture was too big a file. Shows as VBAR Boot connect USB Deviceby ironman49 - Café
Ok my neo no. 20001994 connected to my PC in picture attached seems ok. It's serial nu indicates it needs the workaround right? Do I need to uninstall my current vbar manager then proceed as per the link you sent me.Sorry about all the confusion. Ericby ironman49 - Café
I have registered another neo this morning. So I have two devices that connect. New neo vbars with vlink. My older device a neo without vlink does not connect and my controller does not connect. The devices that connect show as vboot in windows.the devices that do not connect show as vbar. Are you suggesting I format the vbar controller and the none connecting neo? Ericby ironman49 - Café
Look in my computer shows a USB storage storage device called VControl Ericby ironman49 - Café
Hello, Been trying to connect again and have found that my second neo no longer connects to the manager. When I try to connect my controller it shows A USB symbol as the windows signals a USB device,then this disappears and stick shows beside USB mode no serial numbers show for either of them. The neo I have updated connects to the manager and displays serial number and update data. I obtainby ironman49 - Café
Hi, Trying to register my transmitter/controller like I have my neo the manager does not find it when connected to the USB in the same manner as the neo. In the transmitter under USB it has a cross through USB. I have purchase pro and have updated my neo thought I would update the controller it has never been registered. Eric Corkerby ironman49 - Café
I want to reduce the negative collective pitch to 5 degrees . can I do this in the set up wizard on my bar control where 12 - 14 is usually set with 80 - 100 points by reducing the value below the recomended values? Does the expert app do this separately from setting maximum pitch. Eric corkerby ironman49 - Café
When my neo is connected the serial number and firm ware version current are displayed but when I use the applications button the web site displays Access Denied I am not authorised. I want to purchase pro app. Do I need to update my PC software. Eric Corkerby ironman49 - Café
My neo using v controller via a satellite receiver has a blue v light when switched on but after connection and initialisation this turns red and flashes. The swash plate jumps up and down. The heli has flown successfully prior to this with no problems. Eric Corkerby ironman49 - VBar NEO (non VLink)