start && end > -1) { if (start > -1) { var res = data.substring(start, end); start = res.indexOf('>') + 1; res = res.substring(start); if (res.length != 0) { eval(res); } } cursor = end + 1; } } } //]]>
Vbarr controll sn 10004048 this is fullsize blueline vbar, I`ll check the wiring and kontronik esc app.by Dboi80 - Café
Hi Took the heli`s out for the first time this year. I noticed on two flights the battery screen had the summary befoore the flight was finished. I think it still counted down on the percentage, but the summary screen that comes when you disconnect the battery, showed up during flight. This is the screen that shows how many mah, amps, flight duration etc. Is this a bug or is it something wby Dboi80 - Café
Sorry forgot to say it`s a logo 550sx. Problem solved with the programming. Had to stick program mode 1 and 4, so the prog unit isn`t really worth it, since it screws with the endpoints. The batteries where a little old, so better with new batteries, less amp draw. I noticed the mah counting is a little off, it say`s that starting voltage is 21v and end voltage is 23v. Is this normal. 6s isby Dboi80 - Setups
Hi I have some strange behavior. I had this setup working fine before updating esc. Kolibri 140 lv and scorp 4025-1100.pinion 16. silverline vbar. Vbar control(not touch)Throttle output about 68-72% HS 1950-2200 Motor and esc became very hot, so hot that esc shut down hard once. Changed to 15 thoot pinion, but still hotter than I like. Fan was not on beacause I had som trouble with telemby Dboi80 - Setups
Anyone know if the flange bearing for the mainshaft support bearing are sold seperatly? dimensions are 10x19x5mm for item number Item no.: 04714by Dboi80 - Logo 200/400/500/600 Questions
how should I wire it then? Black as negativ and white as signal?by Dboi80 - Setups
Thanks for the reply RV, this is a little frustrating. The app doesn`t come up when spooling up. It´s installed and used when programming the esc. So should have worked. I don`t have any neo`s, have about 10 silver,blueline vbar`s. Do you have a trade up program I don`t have a battery ID, will I then plug telme to that and that into the rx port? Will it be better to change connector toby Dboi80 - Setups
Hi I have a silveline full size vbar, vbar controll and a kolibri 140lv. I can`t get telemetry to work. I have installed the kontronik app for setup, is there a other app for Telme? I have programed mode 4, and mode 9 for front telemetry port with mikado 5 beeps. The telemetry cabel is plugged in to rx a(or1) on the side, since it was that type of connector, is this right. If it`s supposed tby Dboi80 - Setups
Hi again Rainer. It may have been only the telemetry that have disconnected. I saw a bar on the vcontrol wich loaded after. Not really sure here. It hasn`t been flown like this. I saw that the swash was lagging so I didn`t try to fly it. This is entry from 28.04.2019. All of these entry`s are testing on the bench. It seems that when it has had Power the lagging goes away. If I wait a dayby Dboi80 - Questions V5
See if you can read these files. I`am a complete noob an mac and didn`manage to install the software on my windows 10 machine.by Dboi80 - Questions V5
Ok, How do I get the files out from the vbar control?by Dboi80 - Questions V5
Hi I have a strange problem. I have a nitro trex 700. After initializing the swash lags behind the stick inputs. example: I give full pitch, the swash moves a little, then pauses before it goes up. This doesn`t happen all the time and appears to be happening when it has been powered off for a while. the pauses are short but comes again and again for a little while and then it becomes normal. Soby Dboi80 - Questions V5