Hello,
as soon as vibrations occour - we should have a look about the reason and cure the model.
On nowdays models the designer often use very stiff elements w/o dampening, lots of carbon etc. - they don't care about the FBL sensors.
Having a sensor unit it should pick up the model moves as besta nd precise - so with stiff tape if possile w/o issues would be best here.
If the heli is a "vibration nightmare" like many on the current market - a tad softer pad may help. But - as the FBL is then not picking up every tad of move - we trade a bit precision here.
Using too much tape layers or too soft - the FBL will probably do its "own moves" - and the model has some strange issues.
Better cure the model instead using mutli tape layers - also claim at the heli manufacturers to get them thinking over their designs ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 30.07.2024 23:29 von RV.