I think my Evo is bricked

Hi,

I just performed an update on my EVO Control Touch then on my EVO. But after the update the EVO is flashing Blue and Red and will no longer connect. I tried re binding and the serial number no longer shows up.

I also connected the USB with VBar Control Manager and it connects but says VBar Rescue EVO VLink - is current.

The latest firmware now is 7.1.155 from 7.1.154. I can't access any of the files other than the boot and ID in the root folder.

I did a screenshot of the log file from the "Last Flight" on the Touch (attached). How can I reset the EVO? I also tried tapping it mildly with a tool, no help. Tried a 2S Lipo and also the 12S pack, same problem.

Thanks

Luis

Could you enable a other (e.g. VBar Pro w/o rescue) in the Web UI here and then redo the update with USB?

If this works - toggle back and redo again.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

AMEN!!!

That did the trick! Thank you very much for the fix!

Any idea what caused the glitch?

Thanks again!

Will you be at IRCHA this year?

Luis

Hello Luis,

ther might have been a short interruption during the update in the moment where the new firmware is installed - then we have a invalid firmware on the VBar.

About IRCHA - unfortunately not, we'll see next year if i can attend the event once again.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.