Willkommen! Einloggen - Log In Neuer Benutzer - New User

erweitert

Vbar initializing problem

geschrieben von pilot11 
Vbar initializing problem
16.01.2020 22:20:17
Hi, Since I did not find any relevant info to my issue I couldn't find anything else but opening a new topic.
I'm getting back into helis after 2-3 years and started with my Trex250 with a Vbar Mini blue. During powering it on all the servos are going up-down 15-20 times together but after it seems ok and workes good. At the same time the orange "V" light is blinking. Do you have an idea what it means? Thank you! Laszlo

Mikado Logo 600; 400



1 mal bearbeitet. Zuletzt am 16.01.2020 22:38 von pilot11.
RV
Re: Vbar initializing problem
17.01.2020 07:51:10
Hello Laszlo,

ist this Vbar driven with a VBar Control or a 3rd Party radio?

In 1st case - attach the event log from VBC to this "Flight"
In 2nd one - read it with PC (Get all entries) and attach then (thread will be moved then to the right board too)

Probably there is a hint ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Re: Vbar initializing problem
17.01.2020 21:51:17
Hi Rainer, I use a Spektrum DX7 radio with a DSMX satellite plugged into the Vbar Mini Blue directly. I made a video when the heli was powering up wich you can check out on the link below:

Vbar Blue Mini powering up

I could not attache the pdf log file in here, please advice. In the meantime I attached the printscreen of it.

Hope you find something in it.

Thanks, laszlo

Mikado Logo 600; 400


RV
Re: Vbar initializing problem
17.01.2020 23:20:05
Okay - it seems to be time for the service, the aileron sensor isn't working correctly.

Please go to this device in your list here and create a service request by clicking on the service icon in the list (login section, my devices).

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Re: Vbar initializing problem
18.01.2020 11:51:21
Service request has been made.

Mikado Logo 600; 400
RV
Re: Vbar initializing problem
18.01.2020 13:08:25
Thanks.

My colleque will reply on monday.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Sorry, in diesem Forum dürfen nur registrierte Benutzer schreiben.

Hier klicken um Dich einzuloggen- Click here to login