parameter setup

I hope some one can help me on the right direction , wondering what I should adjust to get the shake go away
a brand new heli raw 420 , this is with and without the blades and now with no load on
- vbar gov
- YGE 95

https://www.youtube.com/watch?v=yCE7ruFGL0M

Did you try with blades?

This comes probably from the Governor - and as there is no load .... you might see this control loop (gain) here. in this case - set up the gain in flight.

If it is even there w/o RPM connected - it comes from Motor/ESC itself, probably check timing.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Hi Rainer
many explain they have this shake on the bench but not in flight but I got it in flight too , I got a tip ogf someone to try and reduse '' proportional limit ( default 20 ) to 0 and this seemed to take awy the shake , just wondering how will this effect the governor in flight
thinking also try the YGE gov this weekend and see the outcome

/
Roger