Using NEO with both VCt and Futaba

I have quite a few helis with NEOs and Futaba SBUS receivers. Is it possible to add a Vlink receiver (or activate the internal NEO receiver) so I can continue to fly using the external Futaba SBUS Rx while also having the convenience of adjusting flight parameters quickly using my VCt ? If so, how do I do this please?

You can do this - having a VBar with integrated VLink. See my Crossover buddyboxing video here:

https://www.vstabi.info/en/node/2095

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks Rainer. Is it necessary to have both transmitters switched on as shown in the video? The way I would like it to work is to have my Futaba transmitter as the default Tx for day-to-day flying and be able to use the VCt for occasional tuning

Hi,

no, once set up, it's either-or, or both (then, you can buddy box with VBar Control as the master).

So, Futaba only at power-on, an the internal receiver will remain dormant, or VBar Control present at power on, then it will either be only that, or if you have Futaba on, too, Futaba will be the buddy.

Cheers

Eddi

Born to fly ...
forced to work.

That's perfect. Thanks for the clarification