Copy Macrocell from Touch to Classic

Hi,

I have uploaded macrocell from Vtouch to cloud, then download and copy to Vclassic, load the setup and it does not show any changes in Edit macrocell.

Do I have a mistake while transfer or are they different format?

Thank you



Edited 1 time(s). Last edit at 05/14/2024 11:32AM by Nhan Phan.

Hi,

no, this should be possible.

On the giving model, you need to save both the setup and the macrocells, they are two separate files.
On the VBar Control Classic, you need to copy the files to the respective folders, model setup to /vbar (or /vplane etc.), and the macrocell file to the /macrocell folder.
If a folder does not/yet exist, you can create it, or save a file one time just so, and the transmitter will create the required folder.
It's the same folder structure on both, by the way.

Kind regards

Eddi

Born to fly ...
forced to work.

Hi Eddi,

I think it should work. but actually it does not.
I tried again, both download from cloud or copy directly vbar, macrocell from Vtouch disk, to Vclassic disk.
The model setup is there, but the macrocell is empty.

If possible, you can access the vbar setup and macro setup from my vtouch cloud.
Or you can reproduce the scenario at your side.

Thank you.

Hi again,

OK, there's probably a catch: VBar Control Touch and EVO save MCs _including_ individual names for cells.
This is a different file than the 'naked' file used on VBar Control classic, which did not yet have that feature.

Workaround: bind the giving VBar to your classic VBar Control, and save MCs there directly. This will only grab the MC settings, but not the MC names, which it can not handle anyways.

Kind regards

Eddi

Born to fly ...
forced to work.

Thank Eddi, classic to classic works.

Born to fly ...
forced to work.