Hi I have a logo 550 with a vbar neo and 2 spectrum satellite receivers that have been working fine with my dx7 transmitter, but now one of them is refusing to bind when I switch on, I have changed the lead,the port its plugged in to and the satellite receiver but I still cannot get it to bind,any ideas please.
Moderator
Registriert seit: 17 Jahren
Beiträge: 17.801
Hi Mike,
if you tried a different lead (lead works with sat 1 but not with sat 2, on both ports), swapped the ports (good sat works on both ports, bad sat doesn't on both), or maybe even tried to bind it using a different VBar unit, this more or less only leaves the sat as the problem.
Best,
Eddi
Born to fly ...
forced to work.
1 mal bearbeitet. Zuletzt am 22.09.2020 10:57 von Eddi E. aus G..