External governor menu

Hello all,

For my new logo 800 I installed a VBAR neo non vlink FBL.
My first own build and setup went ok. I just cannot find how I can adjust
The headspeed in the ‘external governor’ menu on the first page of the vbar software.
For some reason I can only change Value ‘Throttle Out’ and ‘Autorotation’.
It seems I should see more info (slider) here.

Can anyone helpme and explain why the info in the ‘external governor’ menu on startup page is so limited?
For info, No idea if it’s important but ESC is connected to ESC port on vbar.

Probably stupid question for all you experts, sorry for this I’m learning each and every day

Hope someone can help
Thank you



1 mal bearbeitet. Zuletzt am 21.05.2020 18:25 von ROMULUS.

If you are using a external Gov there is no HS who will be governed by the VBar. You just set up the Percentage each bank - and hopefully it will give you the right HS.

Please use the Vbar Governor, enable in NEO, enable the required mode in the ESC and set up a RPM each bank.

As best - do with a ESC which has full bidirectional Mikado Telemetry like Scorpion or YGE togehter with a VBar Control or VBar Control touch. Just one click to hit for all ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.