Scale questions

Hi Need some questions answer please.

1/ when setting up the neo for scale can you explain what size model for L, XL and XXL

2/ If your model has the main shaft tilted forward should neo be mounted at 90 degrees to the shaft or level with ground

3/ The fuelmeter app. The fuel meter you have on the app instruction page is no longer available could you please recommend an alternative.

Many Thanks

7kg ... 12kg ... 20kg

Fuelmeter is there for VBCt. It requires a Sensor and Sensor Hub.

Which Turbine is in use?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Hi Rainer

Thanks for the info on scale sizes

It's for a Wren 44 I'm fitting in a 1/8 scale Wessex unlike jet cat there is no telemetry and I wish to monitor fuel.

Glen

Here we go - this is what i did before we developed a bidirectional telemetry with JetCat:

https://www.vstabi.info/en/node/2323

This worked well for 2.5 years for me including the battery monitor.

You need:

- a NEO as Sensorhub (special free firmware, see app store)
- the Fuel Sensor
- if batt should be monitored - some resistors
- the sensorhub app (Telemetry section)
- the fuelmeter app (Extensions section)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks Rainer

Where do I get the fuel sensor from please

Glen

Just google for it. Consider some "general electronic distributors" may have it (Mouser, Farnell etc.) too.

FCH-M-POM-LC

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

HI Rainer

I did google, it appears to be discontinued Can you suggest an alternative

this is the manufacturere - probably have a look at the datas and search ...


https://www.btflowmeter.com/en/flow-meter-products/flow-meters-lowflow-flowmeters-low-flow-turbine-flow-meter-fuel-flow-meters-diesel-fuel-flow-meter-watermeters-paddlewheel-flow-meter-oil-flow-meter-oilflowmeter-waterflowmeter-water-meters-turbineflowmeter-oilflowmeter/low-flow-flowmeters-fch-m-pom-series-0002-8-lpm/fch-m-pom-lc-08-lpm-97478617-lc.html

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks Rainer

Spent the weekend searching. Looks like they do not make it anymore.

Glen

Hi Glen,

please shoot me an e-mail (service(at)mikado-heli(dot)de) ... I should still have a couple to spare, back from when we did the testing.
New and unused.

Kind regards

Eddi

Born to fly ...
forced to work.