Hobbywing 60 amp Platinum V4 rpm connection

Hi all,
Hope someone can help me. I have just bought the above ESC and there is a yellow rpm wire provided. Do I connect this wire to the signal pin of the rpm port on the neo? I have always used the hobbywing rpm sensor in the past and just plugged that into the rpm port but didn’t want to damage the neo by connecting this single wire to the wrong pin. Thanks in advance.

According to the manual:

http://www.hobbywing.com/products/enpdf/Platinum60AV4.pdf

Yes. Plug it into RPM - have a look at the "signal" wire (label) for the right orientation.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Many Thanks Rainer. Better safe than sorry.