V-Plane for 4D foamies

Hello,

I would like to use V-Plane on a foamie with a reversing ESC. A reversing ESC would turn the motor full one direction moving the stick all the way up, then the ESC would reverse and go full backwards with the stick all the way down. And mid stick would stop the motor.

I have been able to use a macrocell to put a curve on the ESC channel, giving the correct throttle output, but then the the Throttle hold switch moves the throttle all the way down. This would put the ESC if a full reverse situation.



Can I set the throttle hold to a midstick value to turn the motor off. Or is there another way to accomplish what I want to do.

Okay ... i would try:

- MC ESC is Output as channel, set Failsafe to center (Motor off)
- another MC as fixedvalue center
- another MC as MUX driven by motor switch - On is input collective stick, Off/Idle the MC with center above

Test carefully!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

4D means, it can travel in time, or any singled-out other dimension?

Sorry, couldn't resist just because you can put the drive in reverse ...

—Eddi

Born to fly ...
forced to work.